LTE can be set for equal time or equal rate. Equal rate will drag down the thruput of all users.
Equal time will only impact the user with a poor signal. If everyones signal is great and one users radio signal is bad, that user only gets the thruput that can be crammed into his timeslot because his modulation is low. Everyone else continues as normal. At least that is my understanding. On Nov 12, 2015, at 3:01 PM, Adam Moffett <[email protected]> wrote: > ....any system with 20mhz channels + two chains + 256QAM can claim 100mbps. > Getting past that is going to be carrier aggregation (bigger channels) and > MU-MIMO. > > 5x20mhz channels aggregated = 500mbps. > > MU-MIMO can theoretically double capacity. So there's your 1gig. > I'm not clear on how far you can count on MU-MIMO. In theory it sounds > promising. > > ....and yes, one person at MIMO-A QPSK is going eat up many times the > capacity of a person at 256QAM MIMO-B no matter what wireless system you're > using. The best defense against that will be don't install bad connections. > Nothing new there. > > If you're going to use 100mhz, you could of course install 5 AP's of your > choice and claim you have a 500mbps system. > > On 11/12/2015 4:47 PM, Matt wrote: >> Hear talk of these 50 - 100+ mbps speeds per user and eventually 1 >> gbps. How can LTE do that in 10 to 20 mhz of spectrum? I assume if >> you are offering 50 mbps package in a sector its safe to assume at >> prime time there are going to be at the very least 10 people using it >> in that sector at the same time? Also assume some have less then >> perfect connections to the tower using more air time. >
