The stops? Idec or Phoenix Contact ....might be Altronix... On Dec 8, 2015 2:30 PM, "Joe Novak" <[email protected]> wrote:
> What is the divider called Jaime? Got a model #? > > On Tue, Dec 8, 2015 at 3:24 PM, Jaime Solorza <[email protected]> > wrote: > >> Like these? >> On Dec 8, 2015 2:10 PM, "Scott Vander Dussen" <[email protected]> >> wrote: >> >>> I’m attempting an enclosure that “looks clean” but don’t have much >>> experience with this stuff. I want to take in a 2 conductor DC power lead >>> and split it multiple ways inside. The incoming DC lead is 12AWG and the >>> split off leads range from 16-20AWG. Is a din rail terminal block what I >>> want to use for this, or is there something better? >>> >>> >>> >>> If I use terminal blocks >>> <http://www.ebay.com/itm/DIN-Rail-Terminal-Blocks-10-Quantity-DK2-5N-RD-Red-Dinkle-12-AWG-Gauge-20A-600V-/121808617275?hash=item1c5c5bff3b:g:ni8AAOSwYHxWPPsz> >>> do I then use jumpers >>> <http://www.ebay.com/itm/DIN-Rail-Terminal-Block-Jumpers-50-Qty-DSS2-5N-02P-Dinkle-12-AWG-2-Pole-DK2-5N-/121326062425?hash=item1c3f98cb59:g:P7kAAOxyBjBTWBni> >>> to bond two or more together? Is it hokey to jump multiple terminal blocks >>> together with those two terminal jumpers? Do all the wires go in one side >>> and jumpers in the back? >>> >>> >>> >>> Sorry for all the n00bness. >>> >> >
