That could be it. I am not on site. The took the tape off of the antenna and gained 10dB on the V pol. The guys at the other end had already taken the tape off.
On Dec 8, 2015, at 4:05 PM, George Skorup <[email protected]> wrote: > Not sure what antennas you have, but all of our Radiowaves HP-EX dishes had a > piece of green mylar tape over the waveguide interface. It's just a > dust/moisture cover for shipping. Most of the Exalt install guides say to > take the tape off of the antenna if installed, and leave the tape on the > radio if installed. > > On 12/8/2015 4:56 PM, Dan Petermann wrote: >> They had taped over the feed horn and forgot to take the tape off.� >> <Mail Attachment.jpeg> >> >> On Dec 8, 2015, at 3:47 PM, Ken Hohhof <[email protected]> wrote: >> >>> You did check xmt power, right?� Accounting for any adaptive >>> modulation/power. >>> � >>> From: Sam Lambie >>> Sent: Tuesday, December 08, 2015 4:43 PM >>> To: [email protected] >>> Subject: Re: [AFMUG] Exalt ExtremeAir >>> � >>> multipath or on a side lobe. did you peak the signals in all 4 directions? >>> >>> � >>> On Tue, Dec 8, 2015 at 3:24 PM, Dan Petermann <[email protected]> wrote: >>> We are installing a pair of ExtremeAir radios and are having an odd issue. >>> >>> At one end the rx� is -41V / -31H. >>> >>> The far end the rx is -35V / -32H. >>> >>> Any idea what could cause a 10dB difference in polarizations? >>> >>> >>> >>> -- >>> -- >>> Sam Lambie >>> Taosnet Wireless Tech. >>> 575-758-7598 Office >>> www.Taosnet.com >> >
