Yes, use same powering mode as 430 and swap pins 5 and 7. That will only supply power on 4 pins, not sure that will be adequate if you are using the AUX port to power something and you are pushing the cable distance, but it worked fine for me and the AP only seems to draw about 10 watts.
From: Paul McCall Sent: Monday, December 21, 2015 10:22 AM To: [email protected] Subject: Re: [AFMUG] 450 900Mhz AP Power supply So, These can be powered off a CMM4 or CMM2 ? certainly people with 48v or 24v battery arrays in the field wont want to plug in a 110vac POE for that Paul From: Af [mailto:[email protected]] On Behalf Of Sriram Chaturvedi Sent: Monday, December 21, 2015 11:21 AM To: [email protected] Subject: Re: [AFMUG] 450 900Mhz AP Power supply Yup. The 5GHz and 900 MHz 450i AP, 450i BHM/BHS use: N000000L034A POWER SUPPLY, 30W, 56V - GigE For the 900 SM, you can use the existing 450 power supply: N000900L001A Gigabit ENET Capable Power Supply (Same as the one for ePMP Sync AP and PMP 450). That said, the N000000L034A is brand new and will be available starting January 2016. In the meantime, you can use: N000065L001B - PTP 650 AC Power Injector, along with AC Line Cord N000065L003A, US Version. Matt talks about this here: http://community.cambiumnetworks.com/t5/PMP-450/Power-supplies/m-p/47637#U47637 Thanks, Sriram Join the Conversation Cambium Networks Community Forum On Dec 21, 2015, at 10:04 AM, Josh Luthman <[email protected]> wrote: I thought it was the same as 450i hardware. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mon, Dec 21, 2015 at 11:02 AM, Justin Marshall <[email protected]> wrote: Hi, Does anyone happen to know offhand what power supply is needed for the 900Mhz 450 AP? Only thing google seems to have a definitive answer on (maybe I’m missing it) is the SM needing 30V, and the back of the AP itself says 55V / 1.1A Thanks Justin [email protected]
