Netsys products work really well. We have used them for almost 9 years. Rory
From: Af [mailto:[email protected]] On Behalf Of Colin Stanners Sent: Sunday, December 27, 2015 1:34 PM To: [email protected] Subject: Re: [AFMUG] phone lines for Ethernet transmission http://www.netsys-direct.com/product_p/nv-202ekit.htm The only cheaper option is probably back-to-back SDSL modems from eBay of the like, which will he slower. On Dec 27, 2015 2:22 PM, "Chris Herrington" <[email protected]<mailto:[email protected]>> wrote: Did this some years ago, and now I need to do it again—use existing phone cabling for Ethernet cabling. 100Mbps OK for this application. I have seen a couple of solutions but they seem terribly expensive, at lease a lot more expensive than I remember. Thanks for any help finding these. Chris Herrington, PMP, RCDD/OSP&WD Specialist FCC Lic. # PG-11-19440 [cid:[email protected]] Full Spectrum Communications Consulting, Engineering, Installation Communications & Electrical Contractor #450317 US Mail: PO Box 60905 Irvine CA 92602 Visit us at: 14701 Myford Road, Suite B Tustin, CA 92780 800-897-7287<tel:800-897-7287>, 714-897-3789<tel:714-897-3789> Chris Cell 714-309-8714<tel:714-309-8714> [email protected]<mailto:[email protected]> http://www.fsc.com<http://www.fsc.com/>
