I don’t think so, that’s a Gemtek radio, the QTS appear to be made by KZ Tech, 
and Mercury says they have control of the software.  Of course who knows what 
commonality of chipsets and hardware/software design is under the hood in all 
these Chinese made radios.  The Greenpacket radios we were using were just 
generic Greenpacket, no customization for Purewave.  I will say the QTS is the 
first WiMAX radio I have logged into that had anything like a normal GUI that 
hinted a service provider or end user had any input into the design.  It’s 
still fairly dumb in bridge mode though.


From: That One Guy /sarcasm 
Sent: Thursday, December 31, 2015 11:21 AM
To: [email protected] 
Subject: Re: [AFMUG] Belkin AC1750DB router leaking LAN to WAN?

interesting, the wix-177 is a mercury product too, are these qts radios the 
same hardware in a new case?

On Thu, Dec 31, 2015 at 10:06 AM, Ken Hohhof <[email protected]> wrote:

  Similar form factor to the Gemtek/Cambium CPE, it's a small diamond shape. 
The GUI is much improved over the Greenpacket radios we had been using, and it 
has LEDs for alignment on the back (not that such low gain antennas need much 
alignment).  You can get a terminated cable through the gland, I think with the 
Greenpackets we had to put the cable through the gland and then terminate them. 
 There might be some advantages along the lines of full 2x2 MIMO upstream, I 
haven't fully researched that, the Mercury guys haven't led me to believe the 
performance will be greatly different.

  I'm not familiar with the Cambium software, so I can't compare to that.


  -----Original Message----- From: Stefan Englhardt
  Sent: Thursday, December 31, 2015 4:15 AM
  To: [email protected]
  Subject: Re: [AFMUG] Belkin AC1750DB router leaking LAN to WAN? 



    Oh, and the Mercury CPE is pretty nice, except I miss the diecast 
articulating mount.  It appears to be made by KZ Broadband Technologies.


  How do they compare to PMP320SM? We've still WiMAX running but aren't very 
happy.











-- 

If you only see yourself as part of the team but you don't see your team as 
part of yourself you have already failed as part of the team.

Reply via email to