No U bolts.. let me sketch it out...my English is not good. Ha On Jan 9, 2016 11:45 AM, <[email protected]> wrote:
> So you would want the mast holder to have U bolts? Then you supply your > own mast? > > I looked at the wall brace, I don’t remember what the issue was, probably > could not build it for a competitive price. I know I played with the > design a bit. > > > > *From:* Jaime Solorza <[email protected]> > *Sent:* Saturday, January 9, 2016 11:36 AM > *To:* Animal Farm <[email protected]> > *Subject:* Re: [AFMUG] Non penetrating mounts > > > OK...here goes...make the mast holder brace like ones on J arms with > degrees on it. Make wide enough to hold different diameter pipe. The screw > and bolt serves two purposes... hinge and anti rotation. So now you can > tilt mast as needed. The yoke will be wide enough to accommodate > different size pipe and by using same tightening method but with longer > screws you can adjust to position. This will work whether support base is > traditional or hinged. Easy enough to make telescoping arms if you have a > machine shop. I waive my consulting fee for the good of the list. BTW..hey > Chuck... you ever make that wall brace idea I sent you? > On Jan 9, 2016 11:26 AM, "Joshaven Mailing Lists" <[email protected]> > wrote: > >> How about Lego® style where you can add/remove parts to make it work for >> larger & smaller setups… >> >> >> Sincerely, >> Joshaven Potter >> Google Hangouts: [email protected] >> Cell & SMS: 1-517-607-9370 >> [email protected] >> >> >> >> >> On Jan 9, 2016, at 1:05 PM, Chuck McCown <[email protected]> wrote: >> >> I get constantly asked to do a non penetrating mount. I have always >> resisted because there are a ton of them out there already. But I get >> almost daily searches for this term on my website. It appears folks >> presume I have one. >> >> If I did one, I would like to have some feature or quality that >> differentiates it from the rest. Perhaps a unit that can be locked or >> hinged for flat or peak mounts. >> >> Maybe one with hinged legs that give it a wider footprint using greater >> leverage so you don’t need as many concrete blocks. >> >> I dunno, any ideas? >> >> >> >
