They should support something like this: http://www.molex.com/mx_upload/editorial/1518/Mega-FIt_Family.jpg
That way there's reduced chances of shorting. ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com Midwest Internet Exchange http://www.midwest-ix.com ----- Original Message ----- From: "Josh Baird" <[email protected]> To: [email protected] Sent: Sunday, January 3, 2016 9:15:39 AM Subject: Re: [AFMUG] +48VDC to 24VDC You could do something like this. The model pictured is a 1036. On Sat, Jan 2, 2016 at 11:32 PM, Ken Hohhof < [email protected] > wrote: Looks like I remembered wrong, 125 watts, $3050. http://routerboard.com/CCR1072-1G-8Splus From: Scott Vander Dussen Sent: Saturday, January 02, 2016 10:08 PM To: [email protected] Subject: Re: [AFMUG] +48VDC to 24VDC Close, it's the 256 core version is 72W, $895 MSRP. Thanks, `S --- Sent mobile, typed by thumbs. On Jan 2, 2016, at 16:59, Ken Hohhof < [email protected] > wrote: <blockquote> The 72 core version is something like 250 watts, isn’t it? From: Scott Vander Dussen Sent: Saturday, January 02, 2016 6:55 PM To: [email protected] Subject: Re: [AFMUG] +48VDC to 24VDC Well, it doesn't have PoE in, but I also don't have a PoE device there, it's just the CCR1016-12S-1S+ by itself. But you're right, even 802.11at or PoE+ only supports 30W. This must he why MT does not support PoE-in on the higher-end CCRs. Thanks, 'S Sent mobile! On Jan 2, 2016, at 16:47, Ken Hohhof < [email protected] > wrote: <blockquote> Max power consumption 44 watts, so I guess you could power it via POE, but it would have to be a high power POE. From: Scott Vander Dussen Sent: Saturday, January 02, 2016 6:37 PM To: [email protected] Subject: Re: [AFMUG] +48VDC to 24VDC No copper ports, all SFP. :/ Instead of including a "free" copper transceiver I'd prefer one of the ports as PoE-in copper like most of their other products. Thanks, `S --- Sent mobile, typed by thumbs. On Jan 2, 2016, at 16:27, TJ Trout < [email protected] > wrote: <blockquote> feed it poe On Sat, Jan 2, 2016 at 4:22 PM, George Skorup < [email protected] > wrote: <blockquote> Oh look, a new product! And MikroTik still didn't listen. Seriously, how f'n hard is it to listen to your customers for one, and two, at least make it easy to run these things straight off of DC. I have a 1016-12S-1S+ for a fiber project. It's pretty nice with the redundant power supplies. And if this project called for a DC plant, I'd be using something else. Anyway, I'm sure you could rip the AC-DC power supplies out and wire it up how you want. Or drill a couple holes and put some of those banana plug terminal things in I suppose. Too much work for me. On 1/2/2016 5:40 PM, Scott Vander Dussen wrote: <blockquote> With a +48vdc power source would it make sense to power a CCR1016-12S-1S+ by opening the case, bypassing the AC power supplies, and connecting a TRACO Power TCL 060-124 directly to the routerboard? Is there an easier more efficient way? Trying to avoid using AC at all, thanks. </blockquote> </blockquote> </blockquote> </blockquote> </blockquote>
