Bingo, "No SNMP Response". SNMP tab had some old info. Thank you!
A follow-up question. In CNUT, the SMs are auto-detected. After stating "Discovered", when I attempt an update, it states "Unable to communicate with the Network Element. Error:No SNMP response". If I manually enter the IP address, updating works fine. What sort of SNMP configuration do I need to allow updates through the auto-detected connections? Thank you - Chris On Tue, Feb 2, 2016 at 9:29 PM, George Skorup <[email protected]> wrote: > When you try to refresh that AP in CNUT, do you get no SNMP response? Or > what does it do exactly? Or how about what errors does CNUT spit out? I > would start by checking the SNMP communities and Accessing Addresses on the > radio. If you inherited it, it's probably something that simple. > > BTW, I've had stuff on 8.1.5 that I've upgraded just fine. > > > On 2/2/2016 8:09 PM, Christopher Gray wrote: > >> PMP100 gear is relatively new to me (in use on some existing networks >> I've just starting repairing). >> >> I have a P9 AP running v9.5 firmware that I'd like to upgrade to v13.4. I >> just moved a few other P10 APs up to v13.4 without issue, but this one AP >> is not recognized by CNUT. >> >> Is there a trick to get CNUT to recognize the older systems? Is there >> another way to upgrade firmware manually? >> >> Thank you - Chris >> > >
