That should work, but it's only going to work at 100mbps... no gigabit. We have one running on one of the Packetflux 4 port gigabit poe injectors, and it works just fine. It should work fine with a Syncinjector as well, as long as it's running at 48v (not the 320/430 version though) - pretty much anything that will run a 450i AP should run a Mimosa just fine. Although, for longer cable runs you might want to use something that supplies power on all four pairs (I don't believe the syncinjectors do, but the packflux gigabit poe does, as well as the GigE-POE-APC).
On Wed, Feb 3, 2016 at 4:46 PM, Matt <[email protected]> wrote: > Was wandering if something like this would work? > > http://www.ebay.com/itm/181101203272 > > Does packetflux have a syncinjector that is compatiable? > > > On Wed, Feb 3, 2016 at 3:59 PM, Josh Baird <[email protected]> wrote: > > We power them with Netonix. But, you could probably power them with a > > GigE-POE-APC as well. > > > > On Wed, Feb 3, 2016 at 4:35 PM, Matt <[email protected]> > wrote: > >> > >> Looking at replacing some backhauls with Mimosa B5c units. What is > >> everyone using for rack mount and DIN mount POE injectors? I imagine > >> it has to be something 802.3at? > > > > >
