...Primarily because I've never heard of the Metrolinq units. :-) I've used standard AF24's before without issue, but zero experience at 60ghz.
What kind of capacity is available there? Price Point? Is it suitable for Central Illinois? I'm shooting for best match of uptime + capacity - One building will contain our business intelligence/big data folks, who regularly slam their existing 100x100 fiber. I guess one question I have is - will I be able to turn down the AF power far enough at that range to avoid harming them? -----Original Message----- From: Af [mailto:[email protected]] On Behalf Of Faisal Imtiaz Sent: Friday, February 12, 2016 7:05 PM To: [email protected] Subject: Re: [AFMUG] AF24HD feedback 500ft ? Why the AF24HD ? make sure you turn the power way down ..... Your seperation between the two units is fine. You are not going to have an issue, just make sure your Master Slave setup matches (Master for each link on the same side). For such short distance you might also consider looking at the Ignite Metrolinq 60ghz units... Regards. Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232 Help-desk: (305)663-5518 Option 2 or Email: [email protected]<mailto:[email protected]> ----- Original Message ----- > From: "Tyler Treat" > <[email protected]<mailto:[email protected]>> > To: [email protected]<mailto:[email protected]> > Sent: Friday, February 12, 2016 6:53:54 PM > Subject: [AFMUG] AF24HD feedback > We're kicking around ordering a pair of AF24HD links to hook up a > couple new buildings about 500' away from our main campus. > Does anyone have feedback on these units? > Both links would come back to the same rooftop, but 25 - 50 feet apart > horizontally. Roughly 40 degrees of directional separation between the two > paths. Will this separation allow us to reach the full potential of these > radios? > > Good or bad experiences with these? Am I crazy? > > Thanks! > Tyler > ___________________________ > Mangled by my iPhone. > ___________________________
