Use a relay? On Mar 4, 2016 4:19 PM, "Gino Villarini" <[email protected]> wrote:
> thats weird, it leaves no space for lvd > > Sent from Outlook Mobile <https://aka.ms/qtex0l> > > > > > On Fri, Mar 4, 2016 at 2:16 PM -0800, <[email protected]> wrote: > > Frequently the rectifier and batts both go to the bus bar in the fuse or >> circuit breaker panel. >> Some folks feed both the rectifier and batts through a circuit breaker. >> If you do that you need to make sure the breaker can handle the max output >> of the rectifer or more. When there has been an extended power outage the >> batts will max out the rectifier current. >> >> *From:* Scott Vander Dussen <[email protected]> >> *Sent:* Friday, March 4, 2016 1:26 PM >> *To:* [email protected] >> *Subject:* [AFMUG] Eltek Rectifier Huh? >> >> >> Trying to figure these things out! I purchased and built an Eltek >> rectifier product using these products: >> >> >> >> CG1S-AUN-VC COMPACT POWER SHELF / REAR WIRE 200AMP MAX 48V UNIVERSAL >> OUTPUT POLARITY >> >> BC2000-A01-10VC 48V, SYSTEM CONTROLLER W/ ETHERNET, NEXTGENERATION, W/ >> CLEI >> >> V0750A-VC RECTIFIER, 840W, 53.5V, 15A, FAN COOLED (BOTTOM TO TOP) -INPUT: >> 90-264VAC >> >> >> >> It seems like this just takes AC power and gives me 48v DC out. I was >> expecting it would also attach to a battery array and provide charging of >> those batteries plus use their power source if grid power was lost. Am I >> totally wrong on that? I don’t see any method of connecting batteries to >> this power shelf :/ >> >> >> >> Noob out, >> >> Scott >> >
