It's been working pretty well for me too. Hrm...
----- Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP ----- Original Message ----- From: "Rory Conaway" <[email protected]> To: [email protected] Sent: Saturday, March 5, 2016 7:23:33 AM Subject: Re: [AFMUG] Mimosa Autoeverything I’m using it on all my radios with good success but I’m sure it can’t account for every situation yet. Rory From: Af [mailto:[email protected]] On Behalf Of Stefan Englhardt Sent: Saturday, March 5, 2016 6:13 AM To: [email protected] Subject: Re: [AFMUG] Mimosa Autoeverything No. Autoeverything never worked for me. In 1.2.3 it took 80MHz Channel where parts are used on the same tower. Now it selects smaller channels which are used and stayed there for the whole night. Connectivity was so worse that It should move immediately. I got alarmed in the morning as multiple consecutive pings are lost. There is a free 40MHz Channel in 5.8 which I selected manualy and get good results again. Von: Af [ mailto:[email protected] ] Im Auftrag von Mike Hammett Gesendet: Samstag, 5. März 2016 13:55 An: [email protected] Betreff: Re: [AFMUG] Mimosa Autoeverything Did it work fine on 1.2.3? ----- Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP From: "Stefan Englhardt" < [email protected] > To: [email protected] Sent: Saturday, March 5, 2016 12:34:45 AM Subject: [AFMUG] Mimosa Autoeverything Seemed to work for me with 1.3.0. But tonight it selected used channels and got bad packet loss. I had to overrule the selection this morning. Instead of help with interference it makes things worse.
