Yes, that should work.   I'd connect only pins 1, 4 and 5 in that cable to
be safe.

-forrest



On Sat, Mar 5, 2016 at 7:03 PM, Mark - Myakka Technologies <[email protected]>
wrote:

> Forrest,
>
> I will use the H1 pipe and injector  Can I use the GPS daisy chain out
> from the H1 injector to the B1 injector?
>
> --
> Best regards,
>  Mark                            mailto:[email protected]
>
> Myakka Technologies, Inc.
> www.MyakkaTech.com
>
> Proud Sponsor of the Myakka City Relay For Life
> http://www.RelayForLife.org/MyakkaCityFL
>
> Please Donate at Please Donate at http://www.myakkatech.com/RFL.html
> ------
>
> Saturday, March 5, 2016, 8:17:59 PM, you wrote:
>
> FCLA> Some background:
>
> FCLA> The last Revison B hardware shipped in 2008.ᅵᅵ It used a
> FCLA> GPS module manufactured by Sony, which output a sync pulse
> FCLA> regardless of it's lock status.ᅵᅵ Because of changes to the GPS
> FCLA> constellation since 2008, these modules have a significantly
> FCLA> lower likelihood of having an actual GPS lock, so there is a
> FCLA> very good chance you are effectively not GPS synchronized at
> FCLA> that site.ᅵᅵᅵ As a result, I would NOT recommend using a
> FCLA> revision B pipe in a live network unless you are absolutely
> FCLA> certain it has a GPS lock, and maybe not even then.ᅵᅵ
>
>
> FCLA> We went through several revisions of syncpipes between
> FCLA> revision B being retired in 2008 until we released revision H
> FCLA> hardware in 2011.ᅵ That's been long enough ago that I'm not sure
> FCLA> which revision caused us to switch to the current GPS module
> FCLA> manufacturer (or more accurately away from the Sony modules, and
> FCLA> possibly the other supplier of modules we had for a short time),
> FCLA> but revision H or later is definitely safe.ᅵ If someone really
> FCLA> needs me to figure this out I will.
>
>
>
> FCLA> ᅵ
>
>
>
>
>
>
>
>
> FCLA> On Sat, Mar 5, 2016 at 4:00 PM, Mark - Myakka
> FCLA> Technologies <[email protected]> wrote:
> FCLA> Putting in a new sync injector for some 450 stuff.ᅵ I have an old
> B1
> FCLA> sync injector in the hut also.ᅵ Can I daisy chain the new system to
> FCLA> the older B1 system so I only need one sync pipe on the tower or
> FCLA> should I just keep two sync pipes running?
>
>
>
> FCLA> --
> FCLA> Thanks,
> FCLA> ᅵMarkᅵ ᅵ ᅵ ᅵ ᅵ ᅵ ᅵ ᅵ ᅵ ᅵ ᅵ ᅵ ᅵ mailto:
> [email protected]
>
> FCLA> Myakka Technologies, Inc.
> FCLA> www.MyakkaTech.com
>
> FCLA> Proud Sponsor of the Myakka City Relay For Life
> FCLA> http://www.RelayForLife.org/MyakkaCityFL
>
> FCLA> Please Donate at http://www.myakkatech.com/RFL.html
>
>
> FCLA> ---
> FCLA> This email has been checked for viruses by Avast antivirus software.
> FCLA> https://www.avast.com/antivirus
>
>
>
>
>
>
>
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
>
>


-- 
*Forrest Christian* *CEO**, PacketFlux Technologies, Inc.*
Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602
[email protected] | http://www.packetflux.com
<http://www.linkedin.com/in/fwchristian>  <http://facebook.com/packetflux>
<http://twitter.com/@packetflux>

Reply via email to