You can get the regulators from Mouser.com as well. I have a tube of them laying around here somewhere for in-house repairs.
-- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 ----- Original Message ----- From: "Ken Hohhof" <[email protected]> To: [email protected] Sent: Thursday, March 10, 2016 10:33:29 AM Subject: Re: [AFMUG] Need FSK APs, will travel No lead solder has made rework 10x harder. -----Original Message----- From: Chuck McCown Sent: Thursday, March 10, 2016 10:20 AM To: [email protected] Subject: Re: [AFMUG] Need FSK APs, will travel If you have anyone in your shop that has worked with surface mount devices before, I would seriously try the regulator transplant. You can take a box cutter and remove the old one by cutting the pins/legs real close to the body of the part. Then use an iron to mop up and remove the leg remenants. Removing the donor from the SM is a but more touchy. You will need solder wick. Absorb the solder from each leg and try to gently get them to release one by one. Sometimes you can pry them up under heat with a long pin or needle. Once the doner is off and the legs are pretty much straight and looking more or less like they looked when soldered down, all you have to do is place it on the board and hit each leg with an iron, supplying a bit of pressure as the solder on the leg and the solder left on the pad flow. -----Original Message----- From: Scott Vander Dussen Sent: Thursday, March 10, 2016 9:16 AM To: [email protected] Subject: Re: [AFMUG] Need FSK APs, will travel 5.7ghz -----Original Message----- From: Af [mailto:[email protected]] On Behalf Of Chuck McCown Sent: Thursday, March 10, 2016 8:11 AM To: [email protected] Subject: Re: [AFMUG] Need FSK APs, will travel What frequency? -----Original Message----- From: Scott Vander Dussen Sent: Thursday, March 10, 2016 9:07 AM To: 'AF Cambium List ([email protected])' Subject: [AFMUG] Need FSK APs, will travel I'm in the market for 3-6 FSK APs today somewhere in central California. I'll come pick them up! Please hit me off-list if you have any, boards without cases OK. We're searching our inventory now for spares. Or call 209-838-1221 x905. Thx, Scott
