Good point. The PMP 450i 900Mhz we installed calls for a 48v PoE (sped sheet states 48-59v, 802.3at compliant). The test PMP 450 2.4Ghz AP we have plugged in to a Netonix is using 24v (spec sheet states 22-32V)
Vince West Tower Hand Technical Support Shelby Broadband 148 Citizens Blvd Simpsonville, KY 40067 Phone: 1-888-364-4232 On Thu, Mar 10, 2016 at 2:20 PM, George Skorup <[email protected]> wrote: > So if I'm reading this correctly... regular 450 APs are being powered and > running happily at 48VDC? That's funny because they're also supposed to be > 30VDC max. > > > On 3/10/2016 11:45 AM, Scott Vander Dussen wrote: > > You know what's funny is we did... But every time we tested we happened to > grab 450 since that's almost exclusively what were installing now. One time > one of the techs put a FSK SM on it and it died- he mentioned it in passing > but we chalked it up to bad FSK taken from our graveyard bin on pulls. �� > > Thanks, > `S > > --- > Sent mobile, typed by thumbs. > > On Mar 10, 2016, at 09:34, Josh Luthman < <[email protected]> > [email protected]> wrote: > > That's awesome. Glad it's not too bad. > > Next time lab it :) > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > On Mar 10, 2016 12:31 PM, "Scott Vander Dussen" <[email protected]> > wrote: > >> As an update, we scrounged up 4 connectorized APs of our own and Bill >> Prince has 2 which I'm driving out to go get. Paul McCall is also >> connectorized and shipping me some for spares. Love this list, thanks >> guys! We'll have 80% of the customers restored within 90 minutes, the rest >> this afternoon. >> >> Whew, fun morning. >> >> >> -----Original Message----- >> From: Af [mailto:[email protected]] On Behalf Of Chuck McCown >> Sent: Thursday, March 10, 2016 8:07 AM >> To: [email protected] >> Subject: Re: [AFMUG] FSK power problem? >> >> Or, if Cambium was nice, they could give you code to convert an SM into >> an AP. >> >> -----Original Message----- >> From: Chuck McCown >> Sent: Thursday, March 10, 2016 9:05 AM >> To: [email protected] >> Subject: Re: [AFMUG] FSK power problem? >> >> If you are good with an iron, you could remove the regulator chip from an >> SM and replace it into the AP (assuming it is the regulator that dies from >> overvoltage). >> >> -----Original Message----- >> From: Chuck McCown >> Sent: Thursday, March 10, 2016 9:05 AM >> To: [email protected] >> Subject: Re: [AFMUG] FSK power problem? >> >> He might could do an advance replacement... >> >> -----Original Message----- >> From: Chuck McCown >> Sent: Thursday, March 10, 2016 9:04 AM >> To: [email protected] >> Subject: Re: [AFMUG] FSK power problem? >> >> Paul McCall can probably fix those APs. >> >> -----Original Message----- >> From: Christopher Tyler >> Sent: Thursday, March 10, 2016 9:03 AM >> To: [email protected] >> Subject: Re: [AFMUG] FSK power problem? >> >> Live an learn. At least you'll never do it again (hopefully). >> >> -- >> Christopher Tyler >> MTCRE/MTCNA/MTCTCE/MTCWE >> Total Highspeed Internet Services >> 417.851.1107 >> >> ----- Original Message ----- >> From: "Chuck McCown" <[email protected]> >> To: [email protected] >> Sent: Thursday, March 10, 2016 10:02:07 AM >> Subject: Re: [AFMUG] FSK power problem? >> >> We all just shed a collective tear... >> >> At least tomorrow is Friday, right? >> Spring his here! >> Jaime is bound to put some photos of good food on the list. >> Plenty of reasons to continue to live Scott. >> >> From: Scott Vander Dussen >> Sent: Thursday, March 10, 2016 8:58 AM >> To: [email protected] >> Subject: Re: [AFMUG] FSK power problem? >> >> Oh wow, that’s fairly misleading. So I just smoked a ring of FSK. >> >> >> >> From: Af [mailto:[email protected]] On Behalf Of Josh Baird >> Sent: Thursday, March 10, 2016 7:56 AM >> To: [email protected] >> Subject: Re: [AFMUG] FSK power problem? >> >> >> >> Yeah, the SI's take up to ~60V, but they output what you feed them. If >> you feed them 48V, they output 48V. They do not have internal DC/DC >> converters unless I completely missed a new product announcement from >> Forrest (but, I don't see this product on the website). >> >> >> >> On Thu, Mar 10, 2016 at 10:55 AM, Scott Vander Dussen < >> <[email protected]>[email protected]> >> wrote: >> >> >> >> Thanks, >> >> `S >> >> >> >> --- >> >> Sent mobile, typed by thumbs. >> >> >> On Mar 10, 2016, at 07:53, Josh Baird < <[email protected]> >> [email protected]> wrote: >> >> I haven't heard of this magical SyncInjector with a built in DC-DC >> converter that you speak of! >> >> >> >> On Thu, Mar 10, 2016 at 10:48 AM, Scott Vander Dussen < >> [email protected]> wrote: >> >> Yes, but we're using SyncInjector version IO which allows 24-56VDC >> input and regulates that back down to 24VDC for the radios. >> >> -----Original Message----- >> From: Af [mailto:[email protected]] On Behalf Of Chuck McCown >> Sent: Thursday, March 10, 2016 7:39 AM >> To: [email protected] >> Subject: Re: [AFMUG] FSK power problem? >> >> Dumb question: >> You know the FSK have an absolute max input voltage of 30 VDC with >> the smoke exit voltage around 36 VDC, right? >> >> -----Original Message----- >> From: Scott Vander Dussen >> Sent: Thursday, March 10, 2016 8:34 AM >> To: [email protected] >> Subject: [AFMUG] FSK power problem? >> >> We just changed out a 24vdc 20A AC/DC power supply with a 48vdc >> rectifier. >> This powers 4 Syncinjectors and 2 Netonix. There is a mix of 450 >> and FSK APs in each of those Syncinjectors. When we powered back up 6 of >> the 6 FSK wont establish eth link with the Netonix, all the 450 are fine. >> Ideas? >> Tower climber en route but I'm stumped. TIA >> >> Thanks, >> `S >> >> --- >> Sent mobile, typed by thumbs. >> >> >> >> >> >> >> >> >> >> >> >> >
