You have to watch Tessco. They are in Maryland so if you aren't on the east coast shipping gets high. There said they are opening a San Antonio warehouse but o don't know if they are open. Talley and Hutton have more locations.
On Thu, Mar 10, 2016, 6:53 PM Ken Hohhof <[email protected]> wrote: > Hmm, Tessco has Andrew at $138, house brand at $118, not sure why so > expensive. Of course the shipping adds a lot unless you buy a bunch at > once shipped freight on a pallet. > > *From:* Lewis Bergman <[email protected]> > *Sent:* Thursday, March 10, 2016 6:48 PM > *To:* [email protected] > *Subject:* Re: [AFMUG] 5GHz Omni standoff > > > You guys kill me. Chuck makes a great mount for less money. > > On Thu, Mar 10, 2016, 6:31 PM Kurt Fankhauser <[email protected]> > wrote: > >> i thought i was paying somewhere in the $150 range for it >> >> On Thu, Mar 10, 2016 at 7:16 PM, Chuck McCown <[email protected]> wrote: >> >>> What do you pay for an Andrew/Comscope S200? >>> >>> *From:* Ken Hohhof <[email protected]> >>> *Sent:* Thursday, March 10, 2016 1:25 PM >>> *To:* [email protected] >>> *Subject:* Re: [AFMUG] 5GHz Omni standoff >>> >>> How much standoff do you need? I have used Andrew S200 like George says >>> (2 ft standoff) or S300 (3 ft), actually they go up to 6 ft standoff. Or >>> Connect-It Wireless S2-S6. Can be used on vertical or sloping tower legs. >>> Sitepro1 also has several solutions, some of which are YUGE! >>> >>> >>> *From:* Jason McKemie <[email protected]> >>> *Sent:* Thursday, March 10, 2016 2:02 PM >>> *To:* [email protected] >>> *Subject:* Re: [AFMUG] 5GHz Omni standoff >>> >>> I had looked at those, I just didn't know if it had enough standoff for >>> use with an omni - from a shadowing perspective. >>> >>> On Thursday, March 10, 2016, Chuck McCown <[email protected]> wrote: >>> >>>> Here is a good ‘un: >>>> http://www.mccowntech.com/24-inch-pipe-standoff/ >>>> >>>> *From:* Jason McKemie >>>> *Sent:* Thursday, March 10, 2016 12:00 PM >>>> *To:* javascript:_e(%7B%7D,'cvml','[email protected]'); >>>> *Subject:* [AFMUG] 5GHz Omni standoff >>>> >>>> Anyone have suggestions for a standoff mount for use with a 5GHz omni? >>>> It will be mounted to the side of a Pirod tower, so I'm going to need some >>>> sort of standoff to minimize shadowing. >>>> >>>> -Jason >>>> >>> >> >
