Chinese steel. Otherwise known as zinc-plated lead.
bp
<part15sbs{at}gmail{dot}com>
On 3/10/2016 6:25 PM, Chuck McCown wrote:
Hmmm, that is very low. Like lower than wholesale low. I wonder how
they do it for that...
*From:* Ken Hohhof <mailto:[email protected]>
*Sent:* Thursday, March 10, 2016 5:48 PM
*To:* [email protected] <mailto:[email protected]>
*Subject:* Re: [AFMUG] 5GHz Omni standoff
$78 (plus shipping) here:
http://ciwireless1-px.rtrk.com/product/tower-antenna-standoff/
*From:* Kurt Fankhauser <mailto:[email protected]>
*Sent:* Thursday, March 10, 2016 6:31 PM
*To:* [email protected] <mailto:[email protected]>
*Subject:* Re: [AFMUG] 5GHz Omni standoff
i thought i was paying somewhere in the $150 range for it
On Thu, Mar 10, 2016 at 7:16 PM, Chuck McCown <[email protected]
<mailto:[email protected]>> wrote:
What do you pay for an Andrew/Comscope S200?
*From:* Ken Hohhof <mailto:[email protected]>
*Sent:* Thursday, March 10, 2016 1:25 PM
*To:* [email protected] <mailto:[email protected]>
*Subject:* Re: [AFMUG] 5GHz Omni standoff
How much standoff do you need? I have used Andrew S200 like
George says (2 ft standoff) or S300 (3 ft), actually they go up to
6 ft standoff. Or Connect-It Wireless S2-S6. Can be used on
vertical or sloping tower legs. Sitepro1 also has several
solutions, some of which are YUGE!
*From:* Jason McKemie <mailto:[email protected]>
*Sent:* Thursday, March 10, 2016 2:02 PM
*To:* [email protected] <mailto:[email protected]>
*Subject:* Re: [AFMUG] 5GHz Omni standoff
I had looked at those, I just didn't know if it had enough
standoff for use with an omni - from a shadowing perspective.
On Thursday, March 10, 2016, Chuck McCown <[email protected]
<mailto:[email protected]>> wrote:
Here is a good ‘un:
http://www.mccowntech.com/24-inch-pipe-standoff/
*From:* Jason McKemie
*Sent:* Thursday, March 10, 2016 12:00 PM
*To:* javascript:_e(%7B%7D,'cvml','[email protected]');
*Subject:* [AFMUG] 5GHz Omni standoff
Anyone have suggestions for a standoff mount for use with a
5GHz omni? It will be mounted to the side of a Pirod tower,
so I'm going to need some sort of standoff to minimize shadowing.
-Jason
