Try matt <dot> mangriotis <at> cambiumnetworks.com
-----Original Message-----
From: Adam Moffett
Sent: Thursday, March 24, 2016 10:17 AM
To: [email protected]
Subject: Re: [AFMUG] Cambium Support for LibreNMS
There are some Cambium lurkers such as Aaron Schneider and Matt
Mangriottis (sp?). Whether they are actively reading your post is hard
to say of course.
For permission to use their logo, I imagine Matt would be the one to
reach out to. Search the archive for his email address?
On 3/24/2016 10:55 AM, Steve wrote:
Also there is an discussion going on.
What would you consider the 3 top things that all wireless devices (for
the most part) share when it comes to the "health" of a wireless device?
So far IMHO in our industry to start it would be
1) Signal, Power level RSSI in some cases - measured in dBm
2) SNR (Signal to Noise Ratio)
3) GPS status Sync or no sync .. that is the question.
What else would you consider more important that is pretty much global
across all wireless devices?
----- Original Message -----
From: "Steve" <[email protected]>
To: [email protected]
Sent: Thursday, March 24, 2016 10:46:48 AM
Subject: Re: [AFMUG] Cambium Support for LibreNMS
Nope not yet. We are making some minor changes and going back and forth
at the moment before it gets merged. We'll use a temp icon at first if we
have to.
Any Cambium employees watching?
----- Original Message -----
From: "Mike Hammett" <[email protected]>
To: [email protected]
Sent: Thursday, March 24, 2016 8:55:53 AM
Subject: Re: [AFMUG] Cambium Support for LibreNMS
Did you get someone from Cambium?
-----
Mike Hammett
Intelligent Computing Solutions
Midwest Internet Exchange
The Brothers WISP
----- Original Message -----
From: "Steve" <[email protected]>
To: [email protected]
Sent: Tuesday, March 22, 2016 8:51:42 AM
Subject: Re: [AFMUG] Cambium Support for LibreNMS
Forgot to mention limited support for CMM 3.x and 4.x. We need to add all
the network info, but it does graph the GPS stats. More will be coming.
Also some devices graph CRC errors, jitter, data rate, modulation mode,
SSR, temperature and other indicators we thought would be useful to
monitor.
----- Original Message -----
From: "Steve" <[email protected]>
To: [email protected]
Sent: Tuesday, March 22, 2016 9:40:44 AM
Subject: [AFMUG] Cambium Support for LibreNMS
On a side note - anyone have any Cambium contacts on the list I can talk
to about getting permission to use their logo?
We've added our first pass at detection and graphing for these series of
devices. (Pretty much only the devices we had access to immediately)
PMP100 (AP and SM)
PMP450(AP and SM)
EPMP (AP and SM)
PTP 100
PTP 200/230
PTP 250
PTP 450
PTP 650
EPTP
We are just putting in our pull request today so it should take a day or
so to get merged into the main branch. This is far superior to Observium's
limited support (actually all it really adds is limited detection).
We have actually added "Signal" as a sensor under "Health" and you can set
up a notification for each device if a signal drops below your predefined
threshold. Since most of us use some form of signal as a measure of how
good a connection is it made sense to make it a sensor.
We are also considering adding GPS status under health, as well as SNR
(for those devices that support it).
We are asking for your feedback and help in testing the bugs, and how to
improve the look/feel.
Here are a couple screen shots (we only focused on getting it working and
not really how it looked immediately)
http://imgur.com/a/CtTXy
FYI this is a shared list account so myself or others here may respond to
you. If you wish to contact me directly I can be reached at steve at
wavedirect dot net
