Suprema XPass. POE Powered card reader, and outputs 12v from the card
reader for your mag/strike release.
On 3/28/2016 5:55 PM, Josh Reynolds wrote:
Basically, you just need a centralized controller and then individual
controllers for each door that can operate when they loose
connectivity to the main DB. Striker/mag open/close, keypad input.
On Mon, Mar 28, 2016 at 5:53 PM, Bruce Robertson <[email protected]> wrote:
Sounds like a job for a Raspberry Pi....
On 03/28/2016 03:52 PM, Josh Reynolds wrote:
I'm dying here. Every single system I can find is shit or costs an arm
and a leg, to the point where I'm considering starting a company to
make a better system. I just need an embedded, web based, IP access
control system. It needs to be able to control the individual door
access controllers to electronic striker or maglock to the keypad. POE
here is best. If it requires software running on a windows PC then I
don't want anything to do with it, even for those of you who are like
"put it in a vm"... no. Those resources are reserved for properly
functioning operation systems (and LXC containers!).
I've got 3 doors at one location, then 2 more doors at 2 other locations.
If it has a mobile app, that's even better.
I've installed a couple of HID Global and DoorKing systems in the past
and nothing about this is hard, but the chinese systems are only made
for a single location.
Any suggestions?
!DSPAM:2,56f9b5b850877172017731!
