Not sure what I have on the shelf, but if I have an accu aim with scope you
could borrow it.
-----Original Message-----
From: Sterling Jacobson
Sent: Friday, April 01, 2016 6:07 PM
To: [email protected]
Subject: Re: [AFMUG] How long to Aim?
I'm dealing with amateurs apparently.
Anyone local to Utah that I can pay to drive over and aim this like a PRO?
Better yet, someone that knows Ceragon?
I'm about to punch someone :(
-----Original Message-----
From: Af [mailto:[email protected]] On Behalf Of Chuck McCown
Sent: Friday, April 1, 2016 6:03 PM
To: [email protected]
Subject: Re: [AFMUG] How long to Aim?
Make sure to set the elevation angle dead nuts on with a digital level from
Home Depot. That takes care of part of the problem.
-----Original Message-----
From: Ken Hohhof
Sent: Friday, April 01, 2016 6:01 PM
To: [email protected]
Subject: Re: [AFMUG] How long to Aim?
How close are you to calculated? And are they aligning both ends
simultaneously?
Something is not right. Either someone is being anal about getting the last
half dB, or they're on a sidelobe, or have the polarization wrong, or you
don't have LOS.
If they are tens of dB off, probably sidelobe. Get them to sweep a wider
arc, also use a voltmeter on the BNC connector rather than calling out
numbers.
-----Original Message-----
From: Sterling Jacobson
Sent: Friday, April 01, 2016 6:51 PM
To: '[email protected]'
Subject: [AFMUG] How long to Aim?
How long does it take three people to aim a 10 mile 11Ghz link with 3'
dishes?
I don't know, it's still going on over three hours now...
