Could it be a problem with the GPS sync that's making the water tower reboot? As for the slave rebooting could be an old software bug?
On Thu, Apr 7, 2016 at 9:55 PM, Craig House <[email protected]> wrote: > I know this is old legacy FSK equipment but it is what is on the tower so > we have an odd situation going on. > > Water tower fed with a 5.2 BH20 link from a bank that is 800' away. Only > equipment in use on the tower is a 900 omni. The Master BH and the 900 > omni are on a CMM at the base of the tower. For the last few days the > equipment will reboot itself every 60 minutes or less on average. Not so > odd that the CMM and the equipment on the tower reboots but so does the > slave Bh at the bank at the exact same time. OK I thought Power issues, > I replaced the UPS at the base of the tower. Problem still persists. I > can find no place where the equipment can have a ping watchdog and there is > not a web power switch at the base of the tower either. The odd part is > that out of desperation I logged into the AP and the CMM and factory > defaulted the devices and reconfigured them. When I rebooted the CMM to > apply the reconfiguration, the Remote BH power cycled at the same exact > time. This equipment has been in service for over 2 years and is running > old firmware 9.3 on the BH20's but have never been a problem until now. I > even changed the passwords thinking someone might be accessing them and > causing these issues but I'm stumped. > > Craig >
