That's exactly what my suspicion would be. Check pin 1 connectivity. Also, if you can see the led on the pipe the led should be flashing. On Apr 13, 2016 12:51 PM, "George Skorup" <[email protected]> wrote:
> Data but no pulse = pins 3 & 6 are good, but pin 1 is missing. Either that > or something is electronically wrong with the pipe or radio. Most likely > suspect would be a bad/wrong crimp on the cable. > > On 4/13/2016 1:42 PM, Craig House wrote: > > I have a couple of guys trying to install a 900 FSK using a parasitic pipe on > a tower and this screenshot is from the sink status page in the AP. Is this a > problem with the radio or the parasitic pipe? > > > > > > Sent from my iPhone > > >
