Here are the port configs for both the 10G and 1G interfaces:
interface GigabitEthernet0/2
description Radio Link #1
switchport trunk allowed vlan 496,498,499,807,1998
switchport mode trunk
mtu 9216
flowcontrol receive on
interface TenGigabitEthernet0/1
description 10G Fiber backhaul
switchport trunk allowed vlan 414,471,496,497,499,806
switchport mode trunk
mtu 9216
Thanks!
Craig
Quoting Eric Kuhnke <[email protected]>:
Can you copy and paste the port configuration from a 'show run' on the
ME3600X?
On Thu, Apr 14, 2016 at 1:28 PM, Craig Baird <[email protected]> wrote:
I've got a Cisco ME3600X switch connected up to a pair of Cambium PTP820S
radios via gigabit fiber SFPs. I'm seeing significant outdiscards,
resulting in lost frames on the switch on both ports going to the 820S
radios. The links are not congested--generally pushing less than 100 Mbps
(80 MHz channels, capable of 650 Mbps). I've got other 820S radios
connected to the same model switch in other places, and am not seeing
this. The only difference is that this switch is fed with 10 gig fiber.
I'm wondering if it's a queueing problem of some sort. Anybody have any
ideas?
Craig
