Yeah, could be. They should probably just say 24v-48v on the spec sheet though :)
On Mon, May 9, 2016 at 2:24 PM, Josh Luthman <[email protected]> wrote: > Could be as versatile as some other products that do 24-48v and both > polarities =) > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Mon, May 9, 2016 at 3:23 PM, Jason McKemie < > [email protected]> wrote: > >> Gotcha, the spec sheet is just badly drawn up. I'm not sure why they >> would spec a 24v power adapter if it also uses 48v. Why not just use 48v >> across the board? If the power supply in the damn pool equipment is 48v >> this obviously isn't going to work. >> >> On Mon, May 9, 2016 at 1:57 PM, Josh Luthman <[email protected] >> > wrote: >> >>> Active Ethernet/POE would be 802.3af/at - that's 48v >>> >>> Passive can be whatever, it simply puts the voltage on the wires all the >>> time (like Ubnt or MT stuff). >>> >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> On Mon, May 9, 2016 at 2:55 PM, Jason McKemie < >>> [email protected]> wrote: >>> >>>> It says this in the spec sheet: >>>> >>>> - Active Ethernet (Power over Ethernet) >>>> - Proprietary PoE design >>>> - Power Adapter 24V / 0.6A >>>> >>>> Sounds like 24v to me, but I guess they could just be bad at drawing up >>>> spec sheets. I'll see if I can get a multimeter out there and find out for >>>> sure. >>>> >>>> On Mon, May 9, 2016 at 1:49 PM, Josh Luthman < >>>> [email protected]> wrote: >>>> >>>>> I could have sworn they shipped with the tan blocks with 48v PSU. The >>>>> spec sheet also says active ethernet which would be 48v. >>>>> >>>>> >>>>> Josh Luthman >>>>> Office: 937-552-2340 >>>>> Direct: 937-552-2343 >>>>> 1100 Wayne St >>>>> Suite 1337 >>>>> Troy, OH 45373 >>>>> >>>>> On Mon, May 9, 2016 at 2:46 PM, Jason McKemie < >>>>> [email protected]> wrote: >>>>> >>>>>> The spec sheet says proprietary 24v. >>>>>> >>>>>> On Mon, May 9, 2016 at 1:24 PM, Josh Luthman < >>>>>> [email protected]> wrote: >>>>>> >>>>>>> I thought they were 802.3af/48v? >>>>>>> >>>>>>> >>>>>>> Josh Luthman >>>>>>> Office: 937-552-2340 >>>>>>> Direct: 937-552-2343 >>>>>>> 1100 Wayne St >>>>>>> Suite 1337 >>>>>>> Troy, OH 45373 >>>>>>> >>>>>>> On Mon, May 9, 2016 at 2:19 PM, Jason McKemie < >>>>>>> [email protected]> wrote: >>>>>>> >>>>>>>> Does anyone know the pinout for the PoE on Engenius radios? >>>>>>>> Specifically ENS200EXT? I'm trying to swap one of these for a NS2L >>>>>>>> for a >>>>>>>> customer's pool equipment and am having difficulty finding the correct >>>>>>>> info. Thanks. >>>>>>>> >>>>>>>> -Jason >>>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> >
