pedazo de mierda is more accurate On Sun, May 15, 2016 at 11:46 AM, Josh Reynolds <[email protected]> wrote:
> Woahhhhh there are kids here, watch the language! ;) > On May 15, 2016 10:41 AM, "Jaime Solorza" <[email protected]> > wrote: > >> Orale >> On May 15, 2016 9:36 AM, "Faisal Imtiaz" <[email protected]> >> wrote: >> >>> hehe.. yes I know.. I guess these are the nuances between Cuban Spanish >>> / Puerto Rican Spanish and Mexican Spanish... >>> There was another Cuban Spanish phrase I could have used, but it would >>> not have been appropriate for the list :) >>> >>> All of them are terms of endearment ! (not ! ) >>> >>> :) >>> >>> Faisal Imtiaz >>> Snappy Internet & Telecom >>> 7266 SW 48 Street >>> Miami, FL 33155 >>> Tel: 305 663 5518 x 232 >>> >>> Help-desk: (305)663-5518 Option 2 or Email: [email protected] >>> >>> ------------------------------ >>> >>> *From: *"Jaime Solorza" <[email protected]> >>> *To: *"Animal Farm" <[email protected]> >>> *Sent: *Sunday, May 15, 2016 11:08:41 AM >>> *Subject: *Re: [AFMUG] Odd issue - Mimosa B11 and Mikrotik >>> >>> Careful!!!!....como...can also be " I eat".... ...here is a better >>> translation... "mikrotik vale madre......" >>> On May 15, 2016 8:53 AM, "Faisal Imtiaz" <[email protected]> >>> wrote: >>> >>>> loose translation .... 'como mierada' ! >>>> >>>> >>>> :) >>>> >>>> Faisal Imtiaz >>>> Snappy Internet & Telecom >>>> 7266 SW 48 Street >>>> Miami, FL 33155 >>>> Tel: 305 663 5518 x 232 >>>> >>>> Help-desk: (305)663-5518 Option 2 or Email: [email protected] >>>> >>>> ------------------------------ >>>> >>>> *From: *"Jaime Solorza" <[email protected]> >>>> *To: *"Animal Farm" <[email protected]> >>>> *Sent: *Sunday, May 15, 2016 10:36:02 AM >>>> *Subject: *Re: [AFMUG] Odd issue - Mimosa B11 and Mikrotik >>>> >>>> ...mikrotik POS? Piece of Salmon, point of sale, phaser on stun??? >>>> On May 15, 2016 7:34 AM, "Gino Villarini" <[email protected]> wrote: >>>> >>>>> faisal, thanks. I read this today, but we already fixed the issue by >>>>> replacing the mikrotik POS with a Juniper SRX100 unit... problem solved! >>>>> Thanks to all! >>>>> >>>>> On Fri, May 13, 2016 at 9:25 AM, Faisal Imtiaz < >>>>> [email protected]> wrote: >>>>> >>>>>> Which model CCR are you using ? >>>>>> Pay attention to the ports you are using on that CCR due to how they >>>>>> are connected to the switch chip/CPU. >>>>>> e.g. on CCR 1008, don't use the 1st 4 ports (they are all on a switch >>>>>> chip with a 1g connection to the CPU, so with nat the packets can be >>>>>> hitting the CPU multiple times... >>>>>> >>>>>> if that does not work... then ......Just for kicks.... try the >>>>>> following:- >>>>>> >>>>>> Do the tests with one change at a time. >>>>>> -------------------- >>>>>> make sure you are on the latest 6.35.2 ROS and routerboard firmware >>>>>> is up to date. >>>>>> >>>>>> 1) Turn off connection tracking. >>>>>> >>>>>> 2) change the interface queue to multi-queue- ethernet (reboot >>>>>> required) >>>>>> >>>>>> 3) make sure flow control on the ports to the Radio are on. >>>>>> >>>>>> 4) put a simple queue for the desired BW on the CCR. >>>>>> ------------------- >>>>>> >>>>>> Regards. >>>>>> >>>>>> Faisal Imtiaz >>>>>> Snappy Internet & Telecom >>>>>> 7266 SW 48 Street >>>>>> Miami, FL 33155 >>>>>> Tel: 305 663 5518 x 232 >>>>>> >>>>>> Help-desk: (305)663-5518 Option 2 or Email: [email protected] >>>>>> >>>>>> ------------------------------ >>>>>> >>>>>> *From: *"Gino Villarini" <[email protected]> >>>>>> *To: *"Animal Farm" <[email protected]> >>>>>> *Sent: *Friday, May 13, 2016 9:01:22 AM >>>>>> *Subject: *Re: [AFMUG] Odd issue - Mimosa B11 and Mikrotik >>>>>> >>>>>> yes, using fiber, same issue >>>>>> >>>>>> On Thu, May 12, 2016 at 4:35 PM, [email protected] < >>>>>> [email protected]> wrote: >>>>>> >>>>>>> Did you check for duplex mismatch? >>>>>>> >>>>>>> On Thu, May 12, 2016 at 3:51 PM, Gino Villarini <[email protected] >>>>>>> > wrote: >>>>>>> >>>>>>>> laptop direct to mimosa has no issue >>>>>>>> >>>>>>>> Get Outlook for iOS <https://aka.ms/o0ukef> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On Thu, May 12, 2016 at 12:47 PM -0700, "Jason Wilson" < >>>>>>>> [email protected]> wrote: >>>>>>>> >>>>>>>> Rory had that issue with SME if the mimosa ptmp the CPU in the >>>>>>>>> laptop was maxing out. >>>>>>>>> On May 12, 2016 11:39 AM, "Josh Reynolds" <[email protected]> >>>>>>>>> wrote: >>>>>>>>> >>>>>>>>>> http://wiki.mikrotik.com/wiki/Manual:Wiki/Fasttrack#Description >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Thu, May 12, 2016 at 1:37 PM, Josh Reynolds < >>>>>>>>>> [email protected]> wrote: >>>>>>>>>> > I don't know much about the CCRs. Do they have FastPath and >>>>>>>>>> FastTrack >>>>>>>>>> > enabled by default? >>>>>>>>>> > >>>>>>>>>> > On Thu, May 12, 2016 at 1:33 PM, Gino Villarini < >>>>>>>>>> [email protected]> wrote: >>>>>>>>>> >> no >>>>>>>>>> >> >>>>>>>>>> >> simple config, static ip on the wan, private ip on lan, nat >>>>>>>>>> >> >>>>>>>>>> >> On Thu, May 12, 2016 at 2:30 PM, Josh Reynolds < >>>>>>>>>> [email protected]> wrote: >>>>>>>>>> >>> >>>>>>>>>> >>> Did you copy the config from one CCR to the other? >>>>>>>>>> >>> >>>>>>>>>> >>> On Thu, May 12, 2016 at 1:24 PM, Gino Villarini < >>>>>>>>>> [email protected]> >>>>>>>>>> >>> wrote: >>>>>>>>>> >>> > Got a customer with a dedicated pipe, 250 Mbps >>>>>>>>>> >>> > >>>>>>>>>> >>> > Mimosa B11 to a CCR >>>>>>>>>> >>> > >>>>>>>>>> >>> > BW test from the CCR to our head router provides the BW no >>>>>>>>>> problem. >>>>>>>>>> >>> > >>>>>>>>>> >>> > But Laptop (capable) behind CCR in NAT mode, throughput >>>>>>>>>> dies at about >>>>>>>>>> >>> > 120 >>>>>>>>>> >>> > Mbps >>>>>>>>>> >>> > >>>>>>>>>> >>> > Changed routers, same issue >>>>>>>>>> >>> > >>>>>>>>>> >>> > Any ideas? >>>>>>>>>> >> >>>>>>>>>> >> >>>>>>>>>> >>>>>>>>> >>>>>>> >>>>>> >>>>> >>>
