OK, so I do have the gateway address for the DHCP server directly on a VLAN interface. Is this bad practice? It was working fine on 5.24, and is actually working again since I moved the DHCP server to the bridge that the VLAN is a part of. I just thought it was strange that it stopped working after the upgrade - maybe something was not working as it should in 5.24 and now they've fixed it?
On Sun, May 22, 2016 at 7:51 AM, George Skorup <[email protected]> wrote: > I usually see the red/invalid message on a DHCP server when I.... forget > to put the f'n IP address on the correct interface. And if that VLAN > interface is on a bridge, you have to put the IP on the bridge or DHCP no > worky. > > > On 5/22/2016 7:43 AM, Jon Langeler wrote: > >> Make sure the interface is assigned and up? >> >> Jon Langeler >> Michwave Technologies, Inc. >> >> On May 22, 2016, at 12:59 AM, Jason McKemie < >>> [email protected]> wrote: >>> >>> I upgraded a RB1200 from 5.24 to 6.35.2 and the DHCP server that I had >>> on a VLAN stopped working (server turned red in Winbox). Has anyone else >>> seen this? >>> >>> -Jason >>> >> >
