It was mismatched encryption settings, yes. AP came set for None, SM
came set for DES.
Back in the good old days the defaults lined up :)
------ Original Message ------
From: "George Skorup" <[email protected]>
To: [email protected]
Sent: 5/23/2016 11:01:20 PM
Subject: Re: [AFMUG] 900mhz 450i won't connect
If you accidentally set an SM to AES or DES and the AP is opposite,
just set the AP encryption to None and all SMs will register. Log into
the SMs you have set wrong and fix them. Then change AP back to
whatever encryption you intended.
On 5/23/2016 9:50 PM, Mathew Howard wrote:
There is no super expensive 900mhz SM... there is only one model.
On May 23, 2016 7:00 PM, "Josh Luthman" <[email protected]>
wrote:
Turn the AP to DES encryption.
I'm willing to bet that the standard SM is DES while the super
expensive ones are AES like the old pmp100.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Mon, May 23, 2016 at 7:57 PM, Craig House
<[email protected]> wrote:
AP is in AES encryption SM is in DES mode?
Craig
--------------------------------------------------------------------------------
From: "Adam Moffett" <[email protected]>
To: [email protected]
Sent: Monday, May 23, 2016 6:42:15 PM
Subject: [AFMUG] 900mhz 450i won't connect
Just got an AP and SM to experiment with. I have them one one room
apart.
On first attempt, the SM sees the AP in AP Eval at -22dbm, but
status never changes from "scanning". It doesn't seem to even
attempt to register.
I lowered the Tx power to -10, so now I'm only seeing a -54dbm in AP
Eval, but it still doesn't connect.
I have matching color codes, channel sizes, and checked frequencies
in SM. Is there some other stupid obvious thing that I'm not
thinking of?
I like a lot of the things I'm seeing here, so I really hope I don't
have a dud.
