Matt,
I found this to be true and it works. I had to do this on my ptp450i
link recently we installed.
The last post you mentioned about the default plug does not apply to the
450i as the 450i has no RJ11 port.
On 05/31/2016 10:31 AM, Matt Mangriotis wrote:
In this case (for a 450i radio), the forum post is here:
http://community.cambiumnetworks.com/t5/PMP-FAQ/How-to-Enter-Default-Mode-or-Recovery-Console-for-450i-series/m-p/52971
Matt
*From:*Af [mailto:[email protected]] *On Behalf Of *Ken Hohhof
*Sent:* Tuesday, May 31, 2016 10:03 AM
*To:* [email protected]
*Subject:* Re: [AFMUG] 450 APs
Unless you have a 450i in which case I think you briefly turn off the
power.
*From:*Bill Prince <mailto:[email protected]>
*Sent:*Tuesday, May 31, 2016 9:32 AM
*To:*[email protected] <mailto:[email protected]>
*Subject:*Re: [AFMUG] 450 APs
Resetting to Factory Defaults (2 options) 1. On the radio GUI,
navigate to Configuration, Unit Settings and select Set to Factory
Defaults OR 2. On the radio GUI, navigate to Configuration, Unit
Settings and enable and save option Set to Factory Defaults Upon
Default Plug Detection. When the unit is powered on with a
default/override plug (see section �Acquiring the Override Plug�
in the PMP 450 Configuration and User Guide) the radio will be
returned to its factory default settings.
bp
<part15sbs{at}gmail{dot}com>
On 5/31/2016 7:30 AM, Dennis Burgess wrote:
Without going to cambium and waiting to download and filling out a
bunch of forms, what is the quick and dirty way to reset a 450 AP
back to factory?
�
DennisBurgessSignature
www.linktechs.net <http://www.linktechs.net/> � 314-735-0270
x103 � [email protected] <mailto:[email protected]>
�
