You’ll need a $1500 USB cable to go with that router. From: Jason McKemie Sent: Saturday, June 04, 2016 1:28 PM To: [email protected] Subject: Re: [AFMUG] SFP+ Consumer Wireless Router
Does that thing walk around? On Saturday, June 4, 2016, Sterling Jacobson <[email protected]> wrote: You sound like the guy in 2003 that told me no one will ever need more than 10Mbps, why would a home want an internet connection at 10Mbps. I’m in a business building infrastructure for the next 10-20 years, so this is where I am looking at 10Gbps to the home. There are actual ISP’s that sell 10Gbps connections. I have several customers with a 10Gbps SFP+ connection inside their home already. Do they use it all the time? No, they don’t, not even close. Can they get 9+Gbps on speedtest.net? Yes, they can. With a desktop computer with a SFP+ card in it. What I want is a high powered wireless router that can do close to 1Gbps wireless (which they have), AND have an SFP+ internet port so it can do over 1Gbps NAT traffic. I suppose IPv6 routed would be a lot easier on the router CPU in the future, so that makes it more likely. They just need to put a SFP+ interface on one of these bad boys: http://www.amazon.com/RT-AC5300-Wireless-Tri-Band-AiProtection-Complete/dp/B0167HG1V6 From: Af [mailto:javascript:_e(%7B%7D,'cvml','[email protected]');] On Behalf Of Darin Steffl Sent: Saturday, June 4, 2016 6:00 AM To: javascript:_e(%7B%7D,'cvml','[email protected]'); Subject: Re: [AFMUG] SFP+ Consumer Wireless Router There is not a single residential sub who would need a 10 gig home router. That's insane and router manufacturers aren't gonna make one until more isps are selling 10 gig. Anyway it's silly to even think a single home needs a gig. They still only average about the same usage as a 20 mbps wireless sub. Sent from my smartphone. Please excuse any typos. On Jun 4, 2016 2:22 AM, "Josh Reynolds" <javascript:_e(%7B%7D,'cvml','[email protected]');> wrote: I was about to get to that actually :) I'm still not sure where his gripe lies. I think it's something along the lines of wanting a 10G "home router". On Jun 4, 2016 1:28 AM, "Gino Villarini" <javascript:_e(%7B%7D,'cvml','[email protected]');> wrote: thats the reason for the push for 5 and 25 Gbps Ethernet On Sat, Jun 4, 2016 at 12:44 AM, Josh Reynolds <javascript:_e(%7B%7D,'cvml','[email protected]');> wrote: I'm quite confused. Can you explain exactly what you want to do, and in your opinion, where the problem lies? On Jun 3, 2016 11:42 PM, "Sterling Jacobson" <javascript:_e(%7B%7D,'cvml','[email protected]');> wrote: I just find it frustrating that the top of the line ASUS/Netgear/DLINK wireless AC routers can actually do close to 1000Mbps wireless and have 4 GigE ports, but are limited to 1 GigE internet port. Is there a UBNT or other wireless AC super system that can dual transport the wireless to two GigE connections? I’m not even sure that exists yet, or anything wireless over 1Gbps of actual transport? If there were an AP that could handle that on triple stream AC and dump to paired GigE then I guess I could try a Mikrotik CCR as NAT router on SFP+. In fact, I don’t even think I’ve tried testing the limits of NAT/connection tracking on the CCR. I should probably test that out and see how fast it will go. I know it will bridge 9+Gbps on a desktop with a SFP+ card on a browser going to speedtest.net From: Af [mailto:javascript:_e(%7B%7D,'cvml','[email protected]');] On Behalf Of Josh Reynolds Sent: Friday, June 3, 2016 10:24 PM To: javascript:_e(%7B%7D,'cvml','[email protected]'); Subject: Re: [AFMUG] SFP+ Consumer Wireless Router I've got some Telco systems 4x10 on order, but these are for redundant 10G customers of ours. A consumer router with 10G? Not quite. On Jun 3, 2016 10:54 PM, "Sterling Jacobson" <javascript:_e(%7B%7D,'cvml','[email protected]');> wrote: Correct me if I'm wrong, but there isn't any high end consumer wireless router with an SFP+ WAN/Internet port out there yet, right?
