911.5 is used by some railroad companies for Transponders... On Jun 13, 2016 9:18 PM, "Jaime Solorza" <[email protected]> wrote:
> On your graph it is much wider than what you are stating....how was the > aniritsu set up? Did you try listening to signal? You can find allot of > issues that way....even cellular sites can bleed into 900 MHz band..GTE was > notorious for it... -35dB at 2 blocks? Where is this? City, rural? > On Jun 13, 2016 8:59 PM, "George Skorup" <[email protected]> wrote: > >> Had a friend at the dispatch company stop by and let us use an Anritsu. >> It's a very high power signal at 911.5. And it's very narrow, either 1 or >> 10khz. Maybe 5. I'm tired. On the street with a little 10dBi M2 yagi, we >> couldn't add enough attenuation to get it to stop overloading even the >> analyzer. At least we have a general idea where it's coming from. But >> obviously it's overloading the front end on our Canopy AP, which is at 150' >> and probably two blocks away. I doubt it's anything amateur. This is >> retarded. I fucking hate 900! >> >> Some googling says 911.5 could be a transponder, locator, HID kinda >> thing. But it popped up on Saturday at at 1:30 in the afternoon. It was >> also 101 degrees outside then. I have to wonder if there's a power co >> transformer or a line spitting out crap somewhere like a spark-gap >> transmitter. >> >> On 6/13/2016 7:27 PM, Jay Weekley wrote: >> >> I imagine it could be stronger than that. Looks like the scale stops at >> -35 >> >> Sean Heskett wrote: >> >> whatever it is, it has to be right on the same site as you or aimed right >> at you since it's at a -35 :-/ >> >> On Mon, Jun 13, 2016 at 2:56 PM, George Skorup <[email protected]> wrote: >> >>> Thanks. Not sure why I didn't find that. >>> >>> Not sure what this is, but it sucks. We were on 912 and someone decided >>> to get right on top of us. Now we're at 923 and I can keep only one >>> customer registered (because he's at -45). Looks like we're going to have >>> to abandon 900 at this site. >>> >>> >>> >>> On 6/13/2016 3:30 PM, Micah Miller wrote: >>> >>> I believe that this will answer your >>> question:https://community.ubnt.com/t5/Wireless-Networking/Ubiquiti-900-Mhz-frequencies/td-p/454763 >>> >>> On Mon, Jun 13, 2016 at 2:56 PM, George Skorup <[email protected]> >>> <[email protected]> wrote: >>> >>> Anybody know offhand what the carrier frequencies are for the UBNT M900 at >>> the various channel widths. Is 911 one of them? >>> >>> >>> >> >> >>
