Well the oscillation factor might spook you. ...jk. never worked on one On Jun 17, 2016 8:13 AM, "Adam Moffett" <[email protected]> wrote:
> We would be 20' below the turbine.....well out of range of the blades. Do > you have him stop it because you're closer than that, or is there another > reason? > > > ------ Original Message ------ > From: "Joe Novak" <[email protected]> > To: [email protected] > Sent: 6/17/2016 9:26:13 AM > Subject: Re: [AFMUG] Colo with wind turbine > > > I'm not sure what the specs are of the wind turbine tower we are on.. but > it is a similar tower. 140FT of what I believe is Rohn 45G. Have not had > any issues with power or vibration. We do have the owner lock the turbine > while we are on the tower though. We stay below the last guy wires well out > of the way of the turbine. > > I am really not sure if he is doing DC to AC at the ground or not - he > also has a bunch of solar panels at the base. So YMMV on that. > > On Fri, Jun 17, 2016 at 8:17 AM, Adam Moffett <[email protected]> wrote: > >> I'm talking to somebody who was a 10KW wind turbine on top of a 140' >> tower. I haven't seen it yet, but the dimensions of the tower sound simlar >> to a Rohn 45G. >> >> One of my colleagues is concerned about vibration from the turbine doing >> something bad to us. >> >> There's also 3-phase AC running down from the turbine. I'm concerned >> about colo-ing ethernet with (up to) 10KW of AC power. >> >> Has anybody been down this road? Am I just being paranoid? >> >> > >
