Didn't see my post? :-p 



----- 
Mike Hammett 
Intelligent Computing Solutions 

Midwest Internet Exchange 

The Brothers WISP 




----- Original Message -----

From: "Josh Reynolds" <[email protected]> 
To: [email protected] 
Sent: Saturday, June 18, 2016 8:05:16 PM 
Subject: Re: [AFMUG] CLEC or general Right of way question 


Paul, 
Shoot me an address off list and I'll see if I can help find you something. No 
charge, just want to see if I can help. 
On Jun 18, 2016 5:26 PM, "Paul McCall" < [email protected] > wrote: 





In 2002, I had an ex CLEC consultant working for me who’s idea of fun was to 
digest FCC tariff’s. In doing so, he actually was able to “force” Bellsouth 
(later absorbed as ATT) to run fiber to our office. Over 2 miles of fiber was 
run “just for us” for the whopping cost of $ 2500. NTT verio then provided us 
BW over that fiber for 13 years, and we since have moved on. Like most 
everyone, the loop cost for anything we need to do is very expensive (ATT 
monopoly in this area). We have 2 fiber connections (ATT and HE) over the same 
ATT fiber path (not ideal – but not been a problem for 14 years) 

We are currently shopping BW and loop for the future, so the naturally the 
thought is the next piece of BW should be on a 10 GBit loop. ATT wants a ton 
for that piece, and either No Bids or crazy high bids all the providers we are 
talking to for our next BW. 

So, the question is this. Is it probable that there is a way to use the ATT 
path (underground and pretty big at least in our area) to run our own Fiber 
from here to the C/O. Then, our prospective carriers can just hand off to us in 
the ATT C/O. This Right of Way that ATT uses… Can someone else use the large 
conduit in the ground? Does it take being a CLEC? Does that force ATT to allow 
that or lease that conduit for a reasonable amount? 

Paul 

Paul McCall, President 
PDMNet, Inc. / Florida Broadband, Inc. 
658 Old Dixie Highway 
Vero Beach, FL 32962 
772-564-6800 
[email protected] 
www.pdmnet.com 
www.floridabroadband.com 




Reply via email to