Correct.
----- Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP ----- Original Message ----- From: "Kurt Fankhauser" <[email protected]> To: [email protected] Sent: Wednesday, June 22, 2016 12:33:17 PM Subject: Re: [AFMUG] 450m So if i have a tower like the one below with customers spaced out accordingly, alot of the customers are going to fall wthin 1 or 2 of the 6 degree "strip patches" on the antenna and thus i wont see as much throughput increase per AP? :( On Wed, Jun 22, 2016 at 1:28 PM, Bill Prince < [email protected] > wrote: You can't do that kind of spatial diversity in a PTP link. bp <part15sbs{at}gmail{dot}com> On 6/22/2016 10:11 AM, Kurt Fankhauser wrote: <blockquote> Will there be a PTP version of Medusa that can triple the throughput of existing PTP650 links on the same channel width? I am wondering why the same massive-mimo can't be applied to PTP so a 450mbps PTP650 link running on 45mhz channel can then achieve 1.35Gbps on the same 45mhz channel? On Wed, Jun 22, 2016 at 1:05 PM, Josh Luthman < [email protected] > wrote: <blockquote> Are these uplink and downlink? The epmp 2000 is only uplink. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Jun 22, 2016 12:54 PM, "Peter Kranz" < [email protected] > wrote: <blockquote> With the ETI beamformer antenna.. you get ~20db gain since you have the electrical capture of all the active antennas going on.. in theory creating a high gain very narrow spot beam of 15 degrees or so.. 14 implies something else.. Peter Kranz www.UnwiredLtd.com Desk: 510-868-1614 x100 Mobile: 510-207-0000 [email protected] From: Af [mailto: [email protected] ] On Behalf Of Bill Prince Sent: Wednesday, June 22, 2016 9:51 AM To: [email protected] Subject: Re: [AFMUG] 450m They beam-form the power coming in. bp <part15sbs{at}gmail{dot}com> On 6/22/2016 9:40 AM, Craig Schmaderer wrote: <blockquote> Over poe though? That’s pushing a lot of watts over it, I didn’t hear them say it had a separate power port? From: Af [ mailto:[email protected] ] On Behalf Of Josh Reynolds Sent: Wednesday, June 22, 2016 11:40 AM To: [email protected] Subject: Re: [AFMUG] 450m 48v to 56 or 59v I believe On Wed, Jun 22, 2016 at 11:38 AM, Craig Schmaderer < [email protected] > wrote: <blockquote> Spec sheet says 70watts, how are we going to power this thing, they never said the power options did they? From: Af [mailto: [email protected] ] On Behalf Of Daniel White Sent: Wednesday, June 22, 2016 11:37 AM To: [email protected] Subject: Re: [AFMUG] 450m Yes there is a GigE roadmap that includes 40MHz channels. Daniel White Managing Director – Hardware Distribution Sales ConVergence Technologies Cell: +1 (303) 746-3590 [email protected] From: Af [ mailto:[email protected] ] On Behalf Of Kurt Fankhauser Sent: Wednesday, June 22, 2016 10:30 AM To: [email protected] Subject: Re: [AFMUG] 450m Any plans to offer 40mhz channel on this thing for 800-1000mbps throughput? On Wed, Jun 22, 2016 at 12:22 PM, Mike Hammett < [email protected] > wrote: <blockquote> That does a lot of nothing now. ----- Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP From: "Bill Prince" < [email protected] > To: [email protected] Sent: Wednesday, June 22, 2016 11:21:33 AM Subject: Re: [AFMUG] 450m Take whatever you like from here: <blockquote> https://www.youtube.com/watch?v=YO9JfpcaZRA bp <part15sbs{at}gmail{dot}com> On 6/22/2016 9:17 AM, Matt wrote: <blockquote> <blockquote> There is a webinar going on now as we speak introducing the product. </blockquote> Is there anywhere to download slides or video from the webinar? </blockquote> </blockquote> Virus-free. www.avast.com </blockquote> </blockquote> </blockquote> </blockquote> </blockquote> </blockquote>
