DragonWave.
The interface designs are proprietary by every manufacturer. The only reason Remec became a standard was that Remec ODU's were used by so many manufacturers for a few years. Remec basically gave away their design. This is how manufacturers protect antenna sales (distributors could buy Remec antennas direct from the manufacturers, other OEM's do not allow the antenna manufacturers to sell the antennas to anyone but the OEM typically). Many manufacturers have adapters from one brand to another, and worst case you could always get a remote mount kit and convert to waveguide (although with a 2ft antenna your better buying a new antenna). Daniel White Managing Director - Hardware Distribution Sales ConVergence Technologies Cell: +1 (303) 746-3590 <mailto:[email protected]> [email protected] From: Af [mailto:[email protected]] On Behalf Of Peter Kranz Sent: Tuesday, June 28, 2016 11:19 AM To: [email protected] Subject: [AFMUG] Dragonwave 18Ghz mount compatibility? What other vendors use the same mount as Dragonwave? Peter Kranz www.UnwiredLtd.com <http://www.unwiredltd.com/> Desk: 510-868-1614 x100 Mobile: 510-207-0000 [email protected] <mailto:[email protected]> --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus
