Dont get confused, in the Licensed FDX world a singe port / polarity handles both data paths. So a single polarity operation of the unit would require only 1 N connector.
On Wed, Jun 29, 2016 at 7:49 PM, Eric Kuhnke <[email protected]> wrote: > So... It will have four N connectors and four short jumper cables to a > rear feed on a dish? That will be quite a bit more complicated than a rear > wavguide/feed adapter which just has two polarity offset H and V pol N > connectors. > > I still don't understand what makes ubnt think they're special and can't > put a radio with a cylindrical waveguide directly on the rear of a dish, > such as with a four-bolt REMEC mount. > > Good to hear they are planning on direct DC wiring terminals. Who wants to > bet they successfully put direct -48VDC power capability on the radio (42 > to 56VDC) but don't include an SFP cage? > > > > On Wed, Jun 29, 2016 at 4:31 PM, Rob Genovesi <[email protected]> > wrote: > >> From Gary-UBNT: >> >> "We are working on data sheets right now so hopefully you will get more >> questions answered shortly. The reason for N connectors relates to demand >> for higher mechanical robustness and the ability for the connectors to be >> weather-proof as a stand alone connector (fully weatherproof gaskets and >> the ability to accept larger diameter jumpers readily). The N connectors >> we use are rated to 18+ GHz." >> >> An active thread on the UBNT forums right now, more available here: >> http://community.ubnt.com/t5/airFiber/Some-AF11X-details/td-p/1512145 >> >> -Rob >> >> >> On Wed, Jun 29, 2016 at 12:05 PM, Bill Prince <[email protected]> >> wrote: >> >>> I'm looking at all the other AF-nnX radios from UBNT, and they all use >>> SMA connectors. What reason would they have to use N instead of SMA? Seems >>> the SMA connector would have fewer issues at 11 GHz. >>> >>> >
