Idle or transmitting at full speed?
On 7/24/16 9:50 PM, Josh Luthman wrote:
My notes:
Wall is 123vac. Amp meter says 0.07a. 8.61 watts. This is the factory POE.
POE spits out 24vdc. Amp meter said 0.23a. 5.52 watts.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Jul 24, 2016 11:32 PM, "Mathew Howard" <[email protected]
<mailto:[email protected]>> wrote:
I suspect the Netonix is wrong... the max draw of an AF5x is
supposed to be 15 watts, and it's typically quite a bit lower than
that, from what I've seen. As long as it seems to be working
normally, I wouldn't worry about it.
On Sun, Jul 24, 2016 at 9:36 PM, That One Guy /sarcasm
<[email protected] <mailto:[email protected]>> wrote:
netonix isnt the jeasus it pretends to be maybe. I would love
a poe switch that offers a max wattage across the board. Its
unrealistic, I know, but it would be like jeasus shat diamonds
on a beautiful turd if there was such s beast
On Sun, Jul 24, 2016 at 8:26 PM, Jerry Head
<[email protected] <mailto:[email protected]>>
wrote:
So I have been looking at a new AF5x connection on a
Netonix switch. The Netonix is providing power. I see the
AF5x power draw jump up to around 19.2 watts periodically,
it seems the Netonix only goes up to 18 watts.
What is the deal here? Is the AF5x under powered now? Is
it affecting performance? Is the Netonix confused?
What? Opinions are welcome.
--
If you only see yourself as part of the team but you don't see
your team as part of yourself you have already failed as part
of the team.
