Yeah with Mib based polling. Still a small bit of coding to do though.  Still 
in experimental phase.  

http://docs.librenms.org/Extensions/MIB-based-polling/



----- Original Message -----
From: "Adam Moffett" <[email protected]>
To: [email protected]
Sent: Thursday, July 28, 2016 3:02:11 PM
Subject: Re: [AFMUG] LibreNMS

Can you add MIB's to it?

Like can I load in the Canopy MIB and have it track data points on 
Canopy stuff?

I'm thinking not, but if it did I'd be all over it.



------ Original Message ------
From: "Joe Novak" <[email protected]>
To: [email protected]
Sent: 7/28/2016 12:34:15 PM
Subject: Re: [AFMUG] LibreNMS

>the difference between other NMS and observium/librenms was to build a 
>platform that was plug and play as possible by just adding the device 
>and polling every data point available, in a way that remained 
>consistent.
>
>per https://en.wikipedia.org/wiki/Observium
>
>"Observium has a number of simple core design goals driving its 
>development: minimum interaction, maximum automation and maximum 
>accessibility of information. These design goals have resulted in a 
>slightly unconventional monitoring system with almost no individually 
>customisable settings per device, and where almost everything that can 
>be monitored is automatically discovered."
>
>Your welcome to add devices/OIDs to this by patching the Observium 
>code. I assume librenms would accept it too.
>
>On Thu, Jul 28, 2016 at 11:06 AM, Bill Prince <[email protected]> 
>wrote:
>>You left out the humble part.
>>
>>
>>
>>bp <part15sbs{at}gmail{dot}com>
>>On 7/28/2016 8:59 AM, Josh Baird wrote:
>>>Of course, that is why I lead with 'In my opinion.'
>>>
>>>On Thu, Jul 28, 2016 at 11:54 AM, Josh Reynolds 
>>><[email protected]> wrote:
>>>>That's just like, you know... Your opinion, man.
>>>>
>>>>
>>
>

Reply via email to