one of the documents i was reading said 20% throughput loss from extended
range, thats what i was asking about real word experience from, 320
documentation across the board was always questionable.
I would love to not use it, but 320 was the (dont start the penetration
argument) only thing at distance we could pick customers up through foliage
to get them off 2.4fhss, even 900mhz wouldnt work, I assumed it was wimax
and multipath that allowed it to happen

On Tue, Aug 2, 2016 at 2:31 PM, Eric Muehleisen <[email protected]> wrote:

> See attached link budget sheet. Back in the day, 5%-8% capacity loss was
> the number thrown around with extended range enabled.
>
> IMO, disable extended range and deny those distance subs. You'll increase
> your overall capacity as a result.
>
> On Tue, Aug 2, 2016 at 2:05 PM, That One Guy /sarcasm <
> [email protected]> wrote:
>
>> at 10mhz we get 40 eirp correct?
>>
>> Anyone using the extended range know how much real world sector capacity
>> loss we have? is the aggregate with loss on 10mhz going to be less than the
>> throughput at 7mhz?
>>
>> On Wed, Jul 20, 2016 at 9:35 AM, Eric Muehleisen <[email protected]>
>> wrote:
>>
>>> Yes, but there is an extended range config parameter that overcomes that
>>> limitation.
>>>
>>> On Wed, Jul 20, 2016 at 9:24 AM, That One Guy /sarcasm <
>>> [email protected]> wrote:
>>>
>>>> at 10 mhz isnt the max distance dramatically limited over 7mhz?
>>>>
>>>> On Wed, Jul 20, 2016 at 8:53 AM, Eric Muehleisen <[email protected]>
>>>> wrote:
>>>>
>>>>> We do it like this...
>>>>>
>>>>> A = 3655
>>>>> B = 3682
>>>>> C = 3669
>>>>> D = 3695
>>>>>
>>>>> It'll give you at least 1mhz separation between sectors (which is
>>>>> required).
>>>>>
>>>>> On Wed, Jul 20, 2016 at 8:48 AM, Paul McCall <[email protected]> wrote:
>>>>>
>>>>>> Can the Cambium 320 radios operate in ABCD fashion (10 Mhz channels
>>>>>> using covering from 3650 to 3700) with 4 Cambium sectors?  I know AABB 
>>>>>> with
>>>>>> splitters is common and we did some that way, but we had to remove
>>>>>> splitters to get extra gain in some areas.
>>>>>>
>>>>>>
>>>>>>
>>>>>> I seem to recall there was some “edge issues” or something like
>>>>>> that??   We always lock the customer down to a given 
>>>>>> frequency/basestation,
>>>>>> for what that’s worth.
>>>>>>
>>>>>>
>>>>>>
>>>>>> Paul
>>>>>>
>>>>>>
>>>>>>
>>>>>> Paul McCall, President
>>>>>>
>>>>>> PDMNet, Inc. / Florida Broadband, Inc.
>>>>>>
>>>>>> 658 Old Dixie Highway
>>>>>>
>>>>>> Vero Beach, FL 32962
>>>>>>
>>>>>> 772-564-6800
>>>>>>
>>>>>> [email protected]
>>>>>>
>>>>>> www.pdmnet.com
>>>>>>
>>>>>> www.floridabroadband.com
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> If you only see yourself as part of the team but you don't see your
>>>> team as part of yourself you have already failed as part of the team.
>>>>
>>>
>>>
>>
>>
>> --
>> If you only see yourself as part of the team but you don't see your team
>> as part of yourself you have already failed as part of the team.
>>
>
>


-- 
If you only see yourself as part of the team but you don't see your team as
part of yourself you have already failed as part of the team.

Reply via email to