+1 for Radio Mobile. It has a bit of a learning curve, but you can have most of the items you wanted, sans the potential interference assessment.
On Tue, Aug 2, 2016 at 3:46 PM, Dennis Burgess <[email protected]> wrote: > We have a basic system built into Towercoverage.com J > > > > [image: DennisBurgessSignature] > > *www.linktechs.net* <http://www.linktechs.net/> – 314-735-0270 x103 – > *[email protected]* <[email protected]> > > > > *From:* Af [mailto:[email protected]] *On Behalf Of *Adam Moffett > *Sent:* Tuesday, August 2, 2016 2:19 PM > *To:* [email protected]; [email protected] > *Subject:* Re: [AFMUG] Frequency Planning / Coordination software > > > > I'm also interested in this. > > > > The only suggestion I got before was the obvious one. Plot coverage maps > for each antenna and see where they overlap. I'm sure software exists > > > > ------ Original Message ------ > > From: "SmarterBroadband" <*[email protected]* > <[email protected]>> > > To: *[email protected]* <[email protected]> > > Sent: 8/2/2016 3:09:14 PM > > Subject: [AFMUG] Frequency Planning / Coordination software > > > > Anyone know of any software out there that we could enter all our > > > > Sites > > Backhauls > > AP’s > > Frequencies > > sector directions and beam widths > > > > and it would show possible interference? > > > > We are getting so many towers now that 5 GHz planning is getting more and > more difficult. Trying to keep track of all the frequencies, angles etc. > > > > Thanks > > > > Adam > > -- *Jesse DuPont* Owner / Network Architect email: [email protected] cell: 605-340-0651 fax: 305-946-0651 Celerity Networks LLC PO Box 547 Spearfish, SD 57783 Like us! facebook.com/celeritynetworksllc [image: cid:273145916@30122011-11FC]
