I should mention that for 8 outlets in a 1U rackmount form factor, I have used APC model number AP7900 at several sites. Again, it’s not the cheapest solution, but I have used these for over 10 years and never a single problem, they are very trouble free (which is important – you don’t want your remote reboot device actually causing outages or requiring truck rolls because it locks up). You can also use the rackmount ears to wallmount these. CyberPower makes a version that has 2 inputs and acts as an automatic power switch.
From: Ken Hohhof Sent: Thursday, August 04, 2016 10:21 PM To: [email protected] Subject: Re: [AFMUG] 120 volt power reset via IP address. If you really just have one outlet to control, I have used this in the past: http://dataprobe.com/iboot/ Not the cheapest solution, but straightforward and reliable. From: Brandon Yuchasz Sent: Thursday, August 04, 2016 10:08 PM To: [email protected] Subject: [AFMUG] 120 volt power reset via IP address. We are in need of something that we can log into via IP address and reset the 120 volt power to a piece of equipment from time to time. I doubt I am the first person to need to do this so I figured I would ask you guys for options. Preferably it would be something clean plug it into 120 volt wall plug, then the equipment’s plug into it. An Ethernet cable from the router and good to go. If such a thing exists. Best regards, Brandon Yuchasz GogebicRange.net www.gogebicrange.net
