+1 Shireen DC1021
Storms that rolled through a couple weeks ago took some Ethernet ports with them of UBNT and EPMP. All of those installs where with unshielded cable. *Shrugs* It was the worse electrical storm in a couple years for us, so there is also that. Joe On Fri, Aug 5, 2016 at 9:10 AM, Ken Hohhof <[email protected]> wrote: > Not to start an ideological war, but FWIW, we don’t use shielded cable at > residential installs. > > Typically we use Primus UTP. Have tried Apex9 with the reel in the box, > it’s less kinky but harder to pull from the box. We’re using Shireen > DC-1042 at towers now instead of Belden, so the Shireen UTP should be fine > also. If for some reason we wanted shielded for residential, I assume we’d > use the DC-1042. > > > *From:* That One Guy /sarcasm <[email protected]> > *Sent:* Friday, August 05, 2016 12:53 AM > *To:* [email protected] > *Subject:* Re: [AFMUG] residential cable preferences > > belden something or other was the greatest > but these mopes here where i work like apex 9, I think its utter shit with > its ultrathin foil and brittle copper > > > > On Thu, Aug 4, 2016 at 11:44 PM, George Skorup <[email protected]> wrote: > >> Shireen DC-1021 >> >> >> On 8/4/2016 11:08 PM, Jay Weekley wrote: >> >>> I guess it's time for the regular survey on cable preferences for >>> residential installs. Of course looking for shielded Cat5 and preferably >>> pays out of a box. >>> >> >> > > > -- > If you only see yourself as part of the team but you don't see your team > as part of yourself you have already failed as part of the team. >
