Yeah, I have seen those. Great if you need to do something weird like mount a 2U Dell PowerEdge R710 on its rails in a two post rack, with 50% of the server hanging on each front/back side of the rack. But they're much deeper than I need. Looking for something deeper than the first URL I posted but much shallower than your URL.
On Fri, Aug 5, 2016 at 9:45 AM, Ken Hohhof <[email protected]> wrote: > Maybe like this? > https://www.racksolutions.com/2post-center-mount-brackets.html > > > *From:* Eric Kuhnke <[email protected]> > *Sent:* Friday, August 05, 2016 11:28 AM > *To:* [email protected] > *Subject:* [AFMUG] Rack extension brackets - other vendor options? > > I'm looking for something similar to these, but with a little bit more > stand-off depth: > > http://www.rackmountsolutions.net/standoff_rack_extender.asp > > The application is where I have a single 45U rack two post relay rack. > Vertical space is at a premium. I'd like to make the most use of space and > mount some things that are shallow back-to-back, with the rack extension > hanging off the rear. Or use two sets of the rack extension to bring the > front thing forward 6-8" and the rear thing behind the rack 6-8". > > For example a 1U cat5e patch panel, fully populated/terminated, with a 1U > copper grounding bus bar behind it. Or a horizontail DIN rail with terminal > blocks and stuff on it, mounted behind a shallow depth 2U device that has > front connections. > > Or something that has connections on only one side like a shallow depth 1U > NEMA 5-15 receptacle power strip, with another 1U NEMA 5-15 receptacle > power strip facing the opposite direction mounted back-to-back behind it. > > > >
