I haven't found anything other than the password that doesn't come over... but I don't know about things like the eoip passphrase, since it's not something I typically use.
On Fri, Aug 5, 2016 at 3:12 PM, Joe Novak <[email protected]> wrote: > We do a similar method. I take and create the site specific settings and > then just paste in my 'general' firewall script/backup user settings when > done. > > > > Joe > > > On Fri, Aug 5, 2016 at 2:26 PM, That One Guy /sarcasm < > [email protected]> wrote: > >> we load firmware, reset/no default, then paste the text from the export >> >> when building a new router we load firmware, reset/no default, paste the >> defaults from a text file for our network, then put everything site >> specific in. so it should move everything since we reset/no default from >> the get go? >> >> On Fri, Aug 5, 2016 at 2:11 PM, Joe Novak <[email protected]> wrote: >> >>> any version past v6rc1 'export compact' is the default behavior for >>> export, export verbose is supposedly the 'full' export. >>> >>> >>> http://wiki.mikrotik.com/wiki/Manual:Configuration_Managemen >>> t#Exporting_Configuration >>> >>> >>> On Fri, Aug 5, 2016 at 2:02 PM, That One Guy /sarcasm < >>> [email protected]> wrote: >>> >>>> the ospf key comes over >>>> the device password does not >>>> will eoip passphrase come over? >>>> >>>> in failover if you have the export compact going into a different unit >>>> thats the same model, same firmware, is there anything other than setting >>>> the device password that needs done? >>>> >>>> -- >>>> If you only see yourself as part of the team but you don't see your >>>> team as part of yourself you have already failed as part of the team. >>>> >>> >>> >> >> >> -- >> If you only see yourself as part of the team but you don't see your team >> as part of yourself you have already failed as part of the team. >> > >
