Just re-terminated the cable going into Chuck's Gig-E surge suppressor.
Weather delayed further troubleshooting.
CBB - Jay Fuller wrote:
running the latest release candidate. we had a 24 port switch but it
was actually too large to fit into our cabinent (whoops)
we still have it but it is now back at the office. we had it "rigged"
and it did two mimosa links at 1 gig without incident for at least two
months (aside from the lightning strike that happened about a month
after we instaled it and it burnt out port 1)
that being said - we've converted to two ws-12-250s. Mainly the first
switch is powered - a mix of mimosa, ubnt ac, cambium epmp, and random
ubnt. one mimosa (which linked at 1 gig in the 24 port netonix) is
now only linking at 100 meg and is showing a cable problem. it is
possible the cable was damaged in rerouting 24+ cables in the cabinent.
additionally 1 EPMP radio which was added yesterday (and was plugged
into a legacy 10/100 dlink switch) is now being powered by the
ws-12-250 and is showing a cable problem and is down. Three other
epmp 2.4's are working fine linked at one gig.
i suspect cable damage. but we want to look at all options. i'll
let mr. weekley chime in on any troubleshooting he has done as i've
been asleep most of the day since this is one of our heaviest sites
and i did the switchover between 1:30 am and 5:30 am this morning.....
----- Original Message -----
*From:* Jeff Evans <mailto:[email protected]>
*To:* [email protected] <mailto:[email protected]>
*Sent:* Friday, August 12, 2016 6:32 PM
*Subject:* Re: [WISPA Members] netonix switch
Make sure you're on the current FW version.
What model switch, some still do funky things.
Sent from my Verizon, Samsung Galaxy smartphone
-------- Original message --------
From: Jay Weekley <[email protected]
<mailto:[email protected]>>
Date: 8/12/16 7:12 PM (GMT-05:00)
To: [email protected] <mailto:[email protected]>
Subject: Re: [WISPA Members] netonix switch
Also, has anyone installed a Netonix and seen more than cable
suddenly
show errors (on it's cable test ) and either link at 100 megabit
instead
a gig OR not work at all?
CBB - Jay Fuller wrote:
> Kind of used to the mikrotik - i don't mind the data talleys -
but is
> there anyway to configure the ui to give a real time data readout
> similar to mikrotik? Thanks :)
>
>
> _______________________________________________
> Members mailing list
> [email protected]
> http://lists.wispa.org/mailman/listinfo/members
_______________________________________________
Members mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/members
------------------------------------------------------------------------
_______________________________________________
Members mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/members
