Get more of them? :-) 

I saw someone in NZ (I actually think he's on this list to) had replaced their 
UBNT 120* sector with 4x 30* horns and everything was better after. 



41 dB F/B sure is nice on a "sector". :-) 




----- 
Mike Hammett 
Intelligent Computing Solutions 

Midwest Internet Exchange 

The Brothers WISP 




----- Original Message -----

From: "Stefan Englhardt" <[email protected]> 
To: [email protected] 
Sent: Tuesday, August 16, 2016 8:42:58 AM 
Subject: Re: [AFMUG] ePMP 2000 and RF Elements 



These Horns does not have a „sector pattern“. So they are useless for normal 
towers where you want 360 degree coverage in the first place. But they are 
great as additional sectors for segments where there are more users. They have 
the best FB/Ratio you can get. 



Von: Af [mailto:[email protected]] Im Auftrag von Adam Moffett 
Gesendet: Dienstag, 16. August 2016 15:31 
An: [email protected] 
Betreff: Re: [AFMUG] ePMP 2000 and RF Elements 


I've never looked closely. Yeah I guess if you get the same pattern in the 
elevation as you do in the azimuth then that would explain it. 





------ Original Message ------ 

From: "Mike Hammett" < [email protected] > 

To: [email protected] 

Sent: 8/16/2016 9:25:33 AM 

Subject: Re: [AFMUG] ePMP 2000 and RF Elements 






Most sectors spew shit all over the place. It's also called a symmetric sector 
for a reason. The V beamwidth matches the H beamwidth. 

Surely this isn't the first time you've seen these. 



----- 
Mike Hammett 
Intelligent Computing Solutions 

Midwest Internet Exchange 

The Brothers WISP 





----- Original Message -----


From: "Adam Moffett" < [email protected] > 
To: [email protected] , [email protected] 
Sent: Tuesday, August 16, 2016 8:21:00 AM 
Subject: Re: [AFMUG] ePMP 2000 and RF Elements 

I'm not sure if that all jives. The energy has to go somewhere...if it's not 
coming out the front it ought to be coming out the sides or rear. I.E. if it's 
not emitting outside the intended area, wouldn't the gain by higher rather than 
lower? 





------ Original Message ------ 

From: "Mike Hammett" < [email protected] > 

To: [email protected] 

Sent: 8/16/2016 9:11:19 AM 

Subject: Re: [AFMUG] ePMP 2000 and RF Elements 



<blockquote>


"Could", but likely not. From what I've heard from RF Elements and those that 
have deployed them, the gain numbers can't really be compared straight with the 
antennas we're used to. For one, it's a consistent value across the band and 
across the intended radiation pattern. There are no major nulls where your 18 
dB antenna is really only doing 10 anyway. It also has almost no emissions 
outside of the intended area. That means you have a significantly lower amount 
of noise heard from outside the intended area. *May* not have as much signal, 
but the noise should be more than the difference less. 



----- 
Mike Hammett 
Intelligent Computing Solutions 

Midwest Internet Exchange 

The Brothers WISP 






----- Original Message -----


From: "Matt" < [email protected] > 
To: [email protected] 
Sent: Tuesday, August 16, 2016 8:07:19 AM 
Subject: Re: [AFMUG] ePMP 2000 and RF Elements 

> Any reason you couldn't use an RF Elements horn with an ePMP 2000 (and it's 
> smart antenna)? I assume not, but figured I'd ask. 

There 90 degree horn appears to only have 10 db gain which could be limiting. 




</blockquote>

Reply via email to