Gig ports all around? I know Justin had an issue with micro bursting, that may have been solved with a firmware update. Are you on 2.6.2.1?
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Aug 18, 2016 11:56 AM, "Jordan Gregory" <[email protected]> wrote: > Link tests out at 80ish Mb by 10ish Mb > > Modulation is at MCS 15 > > Ethernet really should be an issue. > > If I test from the switch at the tower, I can get a full Gb to the > internet and the AP is in a Gb port on that switch. > > Thank You, > > Jordan Gregory > Founder / CEO > Hive Wireless, LLC > > On Thu, Aug 18, 2016 at 10:53 AM, Bill Prince <[email protected]> wrote: > >> Haven't looked at the interface for those. It should display the phy rate >> and/or give you the ability to do a link test on the RF side. Right? >> >> Otherwise, you may just have an upstream problem. >> >> >> bp >> <part15sbs{at}gmail{dot}com> >> >> >> On 8/18/2016 8:51 AM, Josh Luthman wrote: >> >> Where's your 3 meg limitation? Rf or Ethernet? >> >> Changed channels? What modulation are you running? >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Aug 18, 2016 11:46 AM, "Jordan Gregory" <[email protected]> >> wrote: >> >>> Good day list, >>> >>> I have a Force 200 operating at very good signal levels but for some >>> reason, I can seem to get any more than 3Mbps out of the connection. >>> >>> Did i miss a setting somewhere? >>> >>> Backstory: Brand new wisp >>> >>> Thank You, >>> >>> Jordan Gregory >>> Founder / CEO >>> Hive Wireless, LLC >>> >> >> >
