Yep... Best practices ....especially in an RF environment.... On Aug 18, 2016 1:55 PM, "George Skorup" <[email protected]> wrote:
> Copper shield? You mean the orange wires? Except for the larger twisted > red/black on the power supply/UPS/battery wires, my normal scheme is red = > +24v, orange = +48v, blue = -48v, and black is always common/return. > > On 8/18/2016 7:32 AM, Jaime Solorza wrote: > > Nice. I would shrink tube that copper shield you wrapped around cable... > We always do... Safer and cleaner > > On Aug 17, 2016 10:51 PM, "George Skorup" <[email protected]> wrote: > >> This is for a retrofit at an ugly FM site. Wiring is a bit messy, but >> meh. Used two separate blank panel because I had them. >> >> Traco TSP360-148 + BCM48 (only one I bought, figured might as well use >> it; BCMU360 from now on). There's a RSD150C-24 hiding behind the DDFL4U >> fuse blocks. PacketFlux 2-relay/3-switch module to monitor the status >> contacts on the BCM. 10A shunt on the negative side of the battery feed >> going into the BCM. PowerInjector + Sync for the 450 cluster. 5ch PDU on >> the end feeding GIGE-POE-APCs for an AF24 and an Exalt ExtendAir G2-11. >> Still got a bunch of old shit on the tower which is what the 8-port >> injector is for. >> >> We'll see how crappily the RB1100 does. Had it sitting around doing >> nothing. Might just end up swapping it for an AHx2. >> >> Can't wait to get my hands on Forrest's new injectors so wiring won't >> have to be this complicated anymore. >> > >
