We have some cheap Chinese 4 dollar sets that are sufficient. The only things on my good 70 dollar but set that these don't have is dial memory and the clips with a bunch of pins that penetrate the insulation so you don't have to cut it.
On Aug 28, 2016 8:57 AM, "Ken Hohhof" <[email protected]> wrote: > Make sure to get one with caller ID name & number display. > > -----Original Message----- From: Chuck McCown > Sent: Sunday, August 28, 2016 4:10 AM > To: [email protected] > Subject: Re: [AFMUG] OT: Butt setts > > http://www.ebay.com/itm/HARRIS-DRACON-DIVISION-M332-1-Linema > ns-Telephone-Phone-Line-Tester-BUTT-SET-/232058877606 > > -----Original Message----- From: Chuck McCown > Sent: Sunday, August 28, 2016 3:08 AM > To: Animal Farm > Subject: Re: [AFMUG] OT: Butt setts > > I don't know if they still make them, but the Harris Dracon was a good one. > More importantly are the clips. You want the expensive clips that will go > on a 66 block, but have bed of nails and the piercing pins. > Speakerphone is good. Nice heavy duty clip to clip on your belt to tool > pouch is good. Weatherproof is good. Drop proof is good. My first butt > set was a 100% rubber BECO. It would survive a drop from the top of a pole > unless it fell with the dial against a rock. Dial would move a little slow > in sub zero weather and you would have to force it back. > > -----Original Message----- From: Jay Weekley > Sent: Saturday, August 27, 2016 9:37 PM > To: Animal Farm > Subject: [AFMUG] OT: Butt setts > > I'm looking for recommendations for butt sets for some upcoming jobs. > Basically I need to get dial tone and and verify the number I am > connected to but not sure of other features that may come with the > higher end sets that may be helpful. > > >
