Whoops, Trango. Sorry, got my T words mixed up.
------ Original Message ------
From: "Jeremy Grip" <[email protected]>
To: [email protected]
Sent: 9/6/2016 9:18:51 PM
Subject: Re: [AFMUG] Trango Apex Lynx/Orion feature request
Telrad or Trango support?
Sent from my iPhone
On Sep 6, 2016, at 9:15 PM, Adam Moffett <[email protected]> wrote:
I just realized I suck at commas. My apologies to grammar nazis.
------ Original Message ------
From: "Adam Moffett" <[email protected]>
To: "Animal Farm" <[email protected]>
Sent: 9/6/2016 9:14:08 PM
Subject: [AFMUG] Trango Apex Lynx/Orion feature request
I submitted the feature request below to Telrad's online ticketing
system earlier today, and they replied that they'll pass the request
to engineering. If you use either the Apex Lynx or Apex Orion and if
you agree with what I'm saying below then please add your voice to
mine and ask for this feature.
""
Feature Request: I think each interface on the Apex Lynx should have
a local management IP address. One on the SFP port, one on the CAT5
port, and one on the RF interface. As an example, many units from
Cambium have an address of 169.254.1.1 which is always accessible
when directly attached to the ethernet port.
I think right now if I was to configure a unit for OOB management via
GE1, then if GE1 was damaged I would permanently lose access to the
device. If I configure for in band management via fiber, then I could
(due to misconfiguration or malfunction) lose access to the device
and require a climber to go up and press the reset button to restore
access. Feel free to correct me if I have a misconception here,
otherwise please consider adding permanent local IP's.
""
